Controller Area Network (CAN) 2.30
Last Updated: 12/24/2012
|
|
|
Version: 2.30
|
| PSoC Creator Component Data Sheet |
|
Features
-
CAN2.0A and CAN2.0B protocol implementation, ISO 11898-1 compliant
-
Programmable bit rate up to 1 Mbps at 8 MHz (BUS_CLK)
-
Two-wire or three-wire interface to external transceiver (Tx, Rx, and Enable)
-
Extended hardware message filter that covers Data Byte 1 and Data Byte 2 fields
-
Programmable transmit priority: Round Robin and Fixed
-
CAN component fully supports PSoC 5LP device, but does not support PSoC 5
|
Symbol Diagram
 |
|
General Description
The Controller Area Network (CAN) controller implements the CAN2.0A and CAN2.0B specifications as defined in the Bosch specification and conforms to the ISO-11898-1 standard.
|
Required Software: PSoC Creator v1.0 Beta 5 and above
|
这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。
これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。
最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。
Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.
Spec No: None;
Sunset Owner: HMI;
Secondary Owner: POA;
Sunset Date: 10/15/11
|
|