Cypress Perform

Home > Documentation > Component Datasheets
Boost Converter (BoostConv) 4.0

Last Updated: 12/27/2012
Version: 4.0
PSoC Creator Component Data Sheet

Features

  • Produces a selectable output voltage that is higher than the input voltage
  • Input voltage range between 0.5 V and 3.6 V
  • Boosted output voltage range between 1.8 V and 5.25 V
  • Source up to 75 mA depending on the selected input and output voltage parameter values
  • Two modes of operation: Active and Standby for PSoC 3 or Sleep for PSoC 5LP
  • Boost Converter component is not supported on PSoC 5
 Symbol Diagram

General Description

The Boost Converter (BoostConv) component allows you to configure and control the PSoC boost converter hardware block. The boost converter enables input voltages that are lower than the desired system voltage to be boosted to the desired system voltage level. The converter uses an external inductor to convert the input voltage to the desired output voltage.

Required Software: PSoC Creator v1.0 Beta 5 and above

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: 001-85030; Sunset Owner: HMI; Secondary Owner: POA; Sunset Date: 10/15/11
Rate Component Da..

Related Pages