The CY3672-USB programming kit enables any user with a PC to quickly and easily program Field-programmable Clock Generators. Set-up requires a power connection and either a parallel port or USB port (CY3672-USB) connection directly to the PC.
Using CyClocksRT™ (embedded in CyberClocks software) or CyberClocks Online, users can configure their parts to a given specification and generate the corresponding JEDEC file. In addition, CyClocksRT software provides PPM optimization and power calculations.
The JEDEC file is then loaded into CY3672 software that communicates with the programmer. The CY3672 software has the ability to read and view the EPROM table from a programmed device.
CY3672-USB is the programming base unit only that does not include any socket adapter. Based on the part number that needs to be programmed, the respective socket adapter has to be ordered and purchased separately.
CY3672-USB Kit Contents:
-
CY3672-USB Programming Base Module
-
Power Adapter:
-
Input: AC 100V to 240V, 0.8A, 50 to 60Hz.
-
Output: DC-12V/2.0A (24W Max)
-
1 USB Cable (Type A to Type B), 1.0M in length
-
1 Parallel Port Cable
-
User Manual
-
CD-ROM with software and driver files
The following socket adapters support the associated press programming device.
|
Socket Part# |
Socket Label |
Programming Device |
|
CY3695 |
CY3672ADP000 |
CY22050F, CY22150F, CY25200F |
|
CY3696 |
CY3672ADP001 |
CY2077FS |
|
CY3697 |
CY3672ADP002 |
CY2077FZ |
|
CY3698 |
CY3672ADP003 |
CY22392F, CY22393F, CY22394F, CY22395F |
|
CY3699 |
CY3672ADP004 |
CY22381F |
|
CY3690 |
CY3672ADP009 |
CY25100ZCF |
|
CY3691 |
CY3672ADP008 |
CY25100SCF |
|
CY3692 |
CY3672ADP006 |
CY23FP12 |
|
CY3724 |
CY3672ADP021 |
CY25701F, CY25702F |
You can order samples of desired devices Online.
Related Documents:
Datasheet: CY3672-USB
Note: This is a programming kit base only. This kit is not designed and intended to be used for device evaluation or testing purposes. Uncompress the CD contents to install the programming software.