AN49943 - PSoC® 1 USB-to-UART Bridge
Last Updated: 12/07/2012
|
|
|
Version: *F
|
| Although USB is now the generally accepted standard for interfacing with PCs, RS-232 and other UART protocols are still widely used in embedded systems and some PC software. This application note describes a USB-to-UART bridge solution implemented in PSoC® 1. User module configuration, critical firmware, and reasons for a USB-to-UART bridge are also described. |
Introduction
This application note shows how to implement a full featured USB-to-UART bridge using PSoC 1. This solution is designed as a reference for designers who need such a bridge in their system. This solution can be implemented and tested on a CY3214 USB Evaluation Board.
.bmp)
Example Project |
Supported H/W and S/W |
Supported PSoC1 Devices |
|
PSoC Designer Version |
H/W Kit |
CY8C20xxx |
CY8C21xxx |
CY8C22xxx |
CY8C23xxx |
CY8C24xxx |
CY8C27xxx |
CY8C28xxx |
CY8C29xxx |
|
Yes |
5.2 |
CY3214 |
|
|
|
|
x94 |
|
|
|
|
这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。
これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。
最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。
Related Application Notes:
Domain Tags: CDC
Related Knowledge Base: UART, USBUART, USBUART, Data rate
Spec No: 001-49943;
Sunset Owner: ARVI;
Secondary Owner: GULA;
Sunset Date: 08/07/11
|
|