Cypress Perform

Home > Documentation > Application Notes
AN2397 - CapSense® Data Viewing Tools

Last Updated: 11/07/2012
Version: *D
AN2397 teaches you how to monitor data from any Cypress CapSense® controller using either the I2C or UART interface. With the tools described in this application note you can view and log real-time sensor data for CapSense tuning and debugging.

During the CapSense design process, you will need to monitor CapSense sensor data, such as raw counts, baseline, and difference counts, for tuning and debugging.

This document helps you to select the proper tool for CapSense sensor data viewing and logging. The two supported communication interfaces are I2C and UART. You should be familiar with CapSense sensing technology before you read this document.

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: 001-41446; Sunset Owner: VAIR; Secondary Owner: ANBA; Sunset Date: 06/06/11
Rate Application ..

Related Pages

Related Parts