|
Title
|
Customer Rating
|
Updated
|
AN61102 - PSoC® 3 and PSoC 5LP - ADC Data Buffering Using DMA
Updated
AN61102 describes how to configure the direct memory access (DMA) to buffer the analog-to-digital converter (ADC) data. It discusses how to overcome some of the limitations of the DMA when buffering the ADC data.
|
(2.3/5) by 3
users
|
02/06/13 |
AN65977 - PSoC® 3 and PSoC 5LP - Creating an Interface to a TMP05/TMP06 Digital Temperature Sensor
AN65977 describes how to configure PSoC 3 applications to interface to an Analog Devices' TMP05 or TMP06 temperature sensor.
|
(4.7/5) by 12
users
|
02/04/13 |
AN66477 - PSoC® 3 and PSoC 5LP® - Temperature Measurement with a Thermistor
|
(3.7/5) by 3
users
|
01/29/13 |
AN73854 - PSoC® 3 and PSoC 5LP - Introduction to Bootloaders
AN73854 gives a brief introduction to bootloader theory and technology, and then shows how bootloaders are implemented in PSoC® 3 and PSoC 5LP devices, using PSoC Creator™. Topics include bootloader system description, features, and customization.
|
Not yet rated
|
01/18/13 |
AN77759 - Getting Started with PSoC® 5LP
AN77759 briefly introduces you to PSoC® 5LP, if you are looking at PSoC 5LP for the first time, this is an excellent place to start.
|
Not yet rated
|
01/18/13 |
AN80248 - PSoC® 3 / PSoC 5LP: Improving the Accuracy of Internal Oscillators
AN80248 shows how to improve the accuracy of the PSoC® 3 or PSoC 5LP internal low-speed oscillator (ILO) and internal main oscillator (IMO) through run-time trim.
|
Not yet rated
|
01/14/13 |
AN52701 - PSoC® 3 and PSoC 5LP - Getting Started with CAN (Controller Area Network)
This application note introduces the basic concepts of CAN (Controller Area Network) and demonstrates how CAN bus communication is implemented using PSoC® 3 and PSoC 5LP.
|
(5/5) by 1
user
|
01/09/13 |
AN52705 - PSoC® 3 and PSoC 5LP - Getting Started with DMA
AN52705 provides an introduction to direct memory access (DMA) in PSoC® 3 and PSoC 5LP.
|
(5/5) by 2
users
|
01/07/13 |
AN54181 - Getting Started with PSoC® 3
PSoC® 1, PSoC 3, and PSoC 5LP are Programmable System-on-Chips that do everything a microcontroller does and more.
|
(4/5) by 10
users
|
01/03/13 |
AN73503 - USB HID Bootloader for PSoC® 3 and PSoC 5LP
A complete USB human-interface device (HID) bootloader solution for PSoC 3 and PSoC 5LP is provided in this Application Note. It describes how to add an USB bootloader to a PSoC 3 or PSoC 5LP project. It also discusses how to create your own bootloader GUI using visual C#. The GUI provided uses the HID interface for communication to perform the whole bootload operation.
|
Not yet rated
|
01/03/13 |
AN82250 - PSoC® 3 and PSoC 5LP Implementing Programmable Logic Designs with Verilog
AN82250 describes how to implement programmable digital logic designs in the PLD portion of PSoC® 3 and PSoC 5LP. It introduces the PSoC Universal Digital Blocks (UDBs) and their Programmable Logic Device (PLD) sub-blocks. An example project illustrates how you can use the PLDs in a design by creating Verilog-based components in PSoC Creator™.
|
(5/5) by 1
user
|
12/26/12 |
AN77900 - PSoC® 3 and PSoC 5LP Low-power Modes and Power Reduction Techniques
AN77900 is an introduction to the PSoC 3 and PSoC 5LP low-power modes and features. Major topics include PSoC power modes, power management API and registers, additional power-saving techniques, and other low-power mode considerations. The associated PSoC Creator project demonstrates these principles.
|
Not yet rated
|
12/26/12 |
AN82156 - PSoC® 3 and PSoC 5LP® - Designing PSoC Creator™ Components with UDB Datapaths
AN82156 explains how to design PSoC® Creator™ components that use PSoC 3 and PSoC 5LP® Universal Digital Block (UDB) datapath modules.
|
(4.7/5) by 6
users
|
12/18/12 |
AN58726 - PSoC® 3 / PSoC 5LP USB HID Intermediate (with Keyboard and Composite Device)
AN58726 covers the next level of human interface devices (HID) USB development on PSoC® 3 / PSoC 5LP discussing OUTPUT items using a keyboard and a composite device as example projects.
|
(5/5) by 1
user
|
12/18/12 |
AN56377 - PSoC® 3 and PSoC 5LP USB Transfer Types
AN56377 describes the four USB transfer types: Interrupt, Bulk, Isochronous, and Control.
|
(3.8/5) by 4
users
|
12/18/12 |
AN77835 - PSoC® 3 to PSoC 5LP Migration Guide
AN77835 provides an overview of topics to consider when designing a project for easy migration between PSoC® 3 and PSoC 5LP devices. Device considerations, PSoC Creator topics, and firmware porting are discussed.
|
Not yet rated
|
12/17/12 |
AN84741 - PSoC® 5 to PSoC 5LP Migration Guide
AN84741 provides an overview of topics to consider when migrating from PSoC® 5 to PSoC 5LP devices. Device considerations and PSoC Creator topics are also discussed.
|
Not yet rated
|
12/17/12 |
AN76458 - PSoC® 5LP Powerline Communication Solution
AN76458 describes how to develop a complete powerline communication system with the PSoC® 5LP family of devices. Attached to the application note is a code example of a 2400 bps FSK modem with the Cypress powerline network protocol. In addition, design files of a board that interfaces the PSoC 5LP device to a high-voltage (110-240 VAC) powerline are also attached.
|
Not yet rated
|
12/17/12 |
AN62582 - AM Modulation and Demodulation
AN62582 explains how to implement amplitude modulation (AM) and demodulation using PSoC® 3 and PSoC 5LP.
|
(3/5) by 1
user
|
12/12/12 |
AN70698 - PSoC® 3 and PSoC 5LP - Temperature Measurement with an RTD
AN70698 explains how to measure temperatures precisely using a four-wire resistance temperature detector (RTD)
|
(5/5) by 2
users
|
12/12/12 |
AN75511 - PSoC® 3 and PSoC 5LP - Temperature Measurement with a Thermocouple
AN75511 explains how to make precise temperature measurements using a Thermocouple and a PSoC® 3 or PSoC 5LP.
|
Not yet rated
|
12/12/12 |
AN78175 - PSoC® 3 and PSoC 5LP - IEC 60730 Class B Safety Software Library
AN78175 describes the PSoC 3 and PSoC 5LP IEC 60730 Class B Safety Software Library and includes an example project with self-check routines to ensure reliable and safe operation.
|
Not yet rated
|
12/07/12 |
AN64275 - PSoC® 3 and PSoC 5LP Getting More Resolution from 8-Bit DACs
AN64275 demonstrates how to increase the resolution of the 8-bit DACs available in the PSoC 3 and 5LP devices up to 12-bits using additional PSoC resources.
|
(4.4/5) by 5
users
|
12/07/12 |
AN60321 - Peak Detection with PSoC® 3 and PSoC 5LP
AN60321 describes several techniques for implementing a peak detector in PSoC 3 and PSoC 5LP.
|
(5/5) by 3
users
|
12/06/12 |
AN82072 - PSoC® 3 and PSoC 5LP USB General Data Transfer with Standard OS Drivers
AN82072 discusses how to use PSoC 3 and PSoC 5LP devices to transfer generic data across USB using native OS drivers included with Windows, Mac OS, and Linux.
|
Not yet rated
|
12/06/12 |
AN58827 - PSoC® 3 and PSoC 5LP Internal Analog Routing Considerations
AN58827 discusses how internal trace and switch resistance can affect the performance of a design and how these issues can be avoided by understanding a few basic details about the PSoC® 3 and PSoC 5LP architecture.
|
(4/5) by 3
users
|
12/06/12 |
AN58304 - PSoC® 3 and PSoC 5LP - Pin Selection for Analog Designs
AN58304 assists the designer in making the best pin selection for both performance and resource utilization for the PSoC 3 and PSoC 5LP families.
|
(4/5) by 4
users
|
12/06/12 |
AN60220 - PSoC® 3 / PSoC 5LP Multiplexed Comparator
AN60220 describes how to multiplex the comparator for use with more than one input signal.
|
(5/5) by 1
user
|
12/06/12 |
AN57821- PSoC® 3 and PSoC 5LP Mixed Signal Circuit Board Layout Considerations
AN57821 introduces basic PCB layout practices to achieve 16 to 20 bit performance for the PSoC® 3 and PSoC 5LP family of devices. The design practices covered in this application note are good rules to use in any mixed signal design for any accuracy.
|
(5/5) by 1
user
|
12/06/12 |
AN73054 - PSoC® 3 and PSoC 5LP Programming Using an External Microcontroller (HSSP)
AN73054 shows how to apply C code to program PSoC® 3 / PSoC 5LP devices using an external microcontroller. This process is referred to as Host Sourced Serial Programming (HSSP), in which the host microcontroller programs PSoC 3 / PSoC 5LP through the serial wire debug (SWD) interface. The C code is written so it can be ported to any microcontroller with minimal changes, greatly reducing the time required to develop HSSP applications for PSoC 3 / PSoC 5LP.
|
Not yet rated
|
12/06/12 |
AN81623 - PSoC® 3 and PSoC 5LP Digital Design Best Practices
AN81623 gives a brief introduction to the digital hardware design theory and then describes the powerful and highly flexible digital subsystem in PSoC 3 and PSoC 5LP. It describes best practices for digital design using PSoC Creator, and shows how to use static timing analysis (STA) report files.
|
Not yet rated
|
12/05/12 |
AN60631 - PSoC® 3 and PSoC 5LP Clocking Resources
AN60631 covers PSoC® 3 and PSoC 5LP's highly versatile and reconfigurable clocking system.
|
(5/5) by 1
user
|
12/05/12 |
AN60594 - PSoC® 3 and PSoC 5LP: 1200 Baud FSK Modulation and Demodulation
AN60594 describes how to create a 1200-baud frequency shift keying (FSK) transmitter and receiver with PSoC® 3 and PSoC 5LP, with digital 0s represented by 2100 Hz, and digital 1s, represented by 1300 Hz. The transmitter is created using a sine table, DMA, and VDAC.
|
(5/5) by 1
user
|
12/05/12 |
AN60616 - PSoC® 3 and PSoC 5LP Startup Procedure
AN60616 describes PSoC® 3 and PSoC 5LP startup procedures, from the application of device power until the execution of user code. It describes how to customize the startup procedure, and includes the reasons a designer might want to change the startup procedure.
|
(5/5) by 1
user
|
12/05/12 |
AN54439 - PSoC® 3 and PSoC 5LP External Crystal Oscillators
AN54439 describes how to use an external crystal or ceramic resonator at 32.768 kHz or in the 4-25 MHz range in PSoC® 3 or PSoC 5LP. External crystal oscillators provide more accurate clock signals than the oscillators built into PSoC 3 and 5LP.
|
(3.9/5) by 11
users
|
12/05/12 |
AN69133 - PSoC® 3 / PSoC 5LP Easy Waveform Generation with the WaveDAC8 Component
AN69133 describes how the WaveDAC8 component works and how to use it to generate either predefined or custom waveforms.
|
(4.7/5) by 3
users
|
12/05/12 |
AN54460 - PSoC® 3 and PSoC 5LP Interrupts
AN54460 explains the interrupt architecture in PSoC® 3 and PSoC 5LP and the support for interrupts in the PSoC Creator™ IDE.
|
(4.5/5) by 4
users
|
12/05/12 |
AN60580 - SIO Tips and Tricks in PSoC® 3 / PSoC 5LP
AN60580 explains the following applications of SIO pins: Comparator, Charge pump, Level shifter, Half wave rectifier, Peak detector, and Sleep wakeup using SIO Comparator.
|
(3.5/5) by 2
users
|
12/05/12 |
AN68272 - PSoC® 3 and PSoC 5LP – Customizing the Bootloader Communication Channel
AN68272 describes how to customize the PSoC 3 and PSoC 5LP bootloader communication channel with UART as an example.
|
(5/5) by 1
user
|
12/05/12 |
AN60317 - PSoC® 3 and PSoC 5LP I2C Bootloader
AN60317 describes how to add an I2C bootloader to a PSoC® 3 or PSoC 5LP project.
|
(5/5) by 3
users
|
12/05/12 |
AN61290 - PSoC® 3 and PSoC 5LP Hardware Design Considerations
AN61290 reviews several topics for designing a hardware system around a PSoC® 3 or PSoC 5LP device. Subjects include power system, reset, crystal, and other pin connections, and programming and debugging interfaces. Also included are instructions on how to use PSoC Creator™ to configure the device for the hardware environment.
|
Not yet rated
|
12/05/12 |
AN73468 - PSoC® 3 and PSoC 5LP - Single-Cell Lithium-Ion (Li-ion) Battery Charger
AN73468 explains a single-cell Lithium-Ion (Li-ion) battery charger implementation using PSoC 3 or PSoC 5LP. Two types of implementations - linear and switching type are supported. An attached PSoC Creator project, which includes a charge display tool, demonstrates Li-ion battery charging.
|
Not yet rated
|
12/05/12 |
AN2099 - PSoC® 1, PSoC 3, and PSoC 5LP - Single-Pole Infinite Impulse Response (IIR) Filters
AN2099 describes a topology for a single-pole infinite impulse response (IIR) filter. It includes equations and software to implement this topology; the associated example projects give the user access to filter routines in either assembly or C.
|
(4.7/5) by 3
users
|
12/05/12 |
AN52927 - PSoC® 3 and PSoC 5LP - Segment LCD Direct Drive
Although segment LCD modules are available with inbuilt drivers, these modules are more expensive than segment LCD glass. PSoC® 3 and PSoC 5 LP, with its configurable analog and digital hardware, also has an integrated configurable LCD driver that supports a wide variety of LCD glass types. This application note explains how to drive multiplexed segment LCD glass using PSoC 3 and PSoC 5LP.
|
(5/5) by 1
user
|
12/05/12 |
AN60024 - Switch Debouncer and Glitch Filter with PSoC® 3 and PSoC 5LP
AN60024 introduces the concepts of switch debouncing and glitch filtering for digital input signals, and shows how to create several debounce and filter projects for PSoC® 3 and PSoC 5LP, using PSoC Creator™.
|
(5/5) by 1
user
|
12/05/12 |
AN66627 - PSoC® 3 and PSoC 5LP Intelligent Fan Controller
AN66627 describes how to configure PSoC 3 and PSoC 5LP applications to independently control up to 16 fans in a single device.
|
(5/5) by 2
users
|
12/05/12 |
AN68403 - PSoC® 3 and PSoC 5LP Analog Signal Chain Calibration
AN68403 explains how to calibrate an analog signal chain by using a calibrated delta sigma ADC and an on-chip EEPROM that is available in PSoC® 3 and PSoC 5LP.
|
Not yet rated
|
12/05/12 |
AN60590 - PSoC® 3 and PSoC 5LP - Temperature Measurement with a Diode
AN60590 explains the diode-based temperature measurement using PSoC® 3 and PSoC 5LP.
|
(3/5) by 2
users
|
12/05/12 |
AN66444 - PSoC® 3 and PSoC 5LP Correlated Double Sampling to Reduce Offset, Drift, and Low Frequency Noise
AN66444 describes the implementation of correlated double sampling (CDS) in PSoC ® 3 and PSoC 5LP, for DC offset cancellation and noise reduction.
|
(3.5/5) by 2
users
|
12/05/12 |
AN62510 - Implementing State Machines with PSoC® 3 / PSoC 5LP
The method to implement state machines using the PSoC® 3 / PSoC 5LP family of devices is explained in this Application Note. Mealy and Moore state machines implementations are shown with associated projects.
|
(4/5) by 1
user
|
12/05/12 |