|
Title
|
Updated
|
Best Method of Amplification to get Better Performance from PSoC® 3 OR PSoC 5 Del Sig ADC - KBA81866
Question: What are the different possible methods of amplification available for using with PSoC 3 or PSoC 5 Del Sig ADC? What is the best method of them to get better performance? |
10/03/12 |
ADC Performance with External Reference in PSoC® 3 or PSoC 5 – KBA83438
Question: Does an external reference improve the ADC performance? |
11/19/12 |
ADC Performance with External Reference in PSoC® 3 and PSoC 5 - KBA 84753
Question: Does an external reference improve ADC performance? |
12/04/12 |
AN70698 - PSoC® 3 and PSoC 5LP - Temperature Measurement with an RTD
AN70698 explains how to measure temperatures precisely using a four-wire resistance temperature detector (RTD) |
12/12/12 |
Three OPAMP instrumentation amplifier
Is there any instrumentation amplifier in PSoC1? |
03/01/12 |
Implementation of DualADC.
How do I implement a Dual ADC in my PSoC 1 design? |
03/29/12 |
Usage of Delta-Sigma ADC and UART
How do I use a Delta Sigma ADC and in a PSoC1 design? |
03/29/12 |
What is R2R reference generation circuit?
What is R2R reference generation circuit? It is mentioned but never described? |
01/01/12 |
Using Incremental ADC to measure 0 to 5V
How to use an Incremental ADC (ADCINCVR) User Module (UM) to measure analog signal? |
03/28/12 |
Precision of ADC
How can the ADC in PSoC (Power Meter), which is only 8-bit incremental, reach the same precision as the ADC in ADE7755, which is 16-bit delta-sigma? |
01/01/12 |
AN66477 - PSoC® 3 and PSoC 5LP® - Temperature Measurement with a Thermistor
|
01/29/13 |
Implementation of Virtual COM port / USBUART
Can I implement a Virtual COM port/USBUART functionality in PSoC1? |
02/09/12 |
AN2017 - PSoC® 1 Temperature Measurement with Thermistor
AN2017 shows how to use PSoC® 1 to accurately measure temperature with a thermistor. |
01/29/13 |
Using ADC10 with external oscillator gives 0xFFFF as output
Why does ADC10 give 0xFFFF as output when used with external oscillator for any input? |
03/05/12 |
ADC Channel Multiplexing
How do i multiplex multiple analog inputs to DelSig ADC in PSoC3 and PSoC5? |
01/20/12 |
AN78920 - PSoC® 1 Temperature Measurement Using Diode
AN78920 explains the diode-based temperature measurement using PSoC® 1 – CY8C28xxx family. |
02/07/13 |
AN2344 - Power Management - Battery Charger with Cell-Balancing and Fuel Gauge Function Support
AN2344 integrates cell-balancing and fuel gauge methods into a multi-cell battery charger. |
12/11/12 |
Is VPWR the same thing as Vdd?
VPWR is mentioned when talking about the SAR8 ADC. Is VPWR the same as Vdd? |
01/01/12 |
AN74170 - PSoC® 1 Analog Structure and Configuration with PSoC Designer™
AN74170 explains the analog structure of standard PSoC® 1 devices and how the global analog parameters affect many of the analog user modules. |
12/11/12 |
AN50475 - Induction Cooker Design with CapSense®
AN50475 discusses the implementation of an induction cooker with CapSense® control based on CY8C22x45. |
12/07/12 |
AN2042 - Sensing - Multifunctional Optical Sensor
|
12/11/12 |
AN2010 - PSoC® 1 Best Practices and Recommendations
AN2010 provides some introductory guidelines and best practices for developing PSoC® 1 systems, and it exposes some common mistakes designers make. |
12/07/12 |
AN78646 - Integrated Power Manager using PSoC® 1
AN78646 describes power management - a critical component of System Management Control (SMC) for computing and communication systems - and explains key concepts of power management such as voltage sequencing, fault detection, voltage and current monitoring, real-time trimming, and I2C host communication. The associated example project delivers a fully integrated power management system solution using a CY8C28645 PSoC® 1 device. |
12/14/12 |
AN55102 - PSoC® 1 - Single Cell Li-Ion Battery Charger with CY8C21x23
AN55102 presents a Lithium-Ion (Li-Ion) battery charger design, with the smallest, low-cost PSoC® 1 device – CY8C21x23. |
12/07/12 |
ADC10 to measure 0 to 4V
How do I implement a 10 bit Single Slope ADC (ADC10) in my PSoC 1 design? |
03/29/12 |
I2CHW User module Slave operation
How to implement I2C slave using I2CHW user module in PSoC1? |
03/23/12 |
Measuring Relative Humidity / Pressure using PSoC1
How to measure environmental variables like Relative Humidity or Pressure using PSoC1? |
03/24/12 |
Multiple instances of ADC8 and ADC10 user module
Can I use multiple instances of ADC8 and ADC10 user module in my project? |
12/05/11 |
Usage of TRIADC
How do I configure and implement a three channel simultaneous incremental ADC (TRIADC) in my PSoC 1 project? |
03/23/12 |
SAR6 Block Chaining
Can two SAR6 block be chained together to form a 12-bit SAR? |
12/28/11 |
Definitions of INL and DNL in an ADC
What does INL and DNL mean in an ADC ? |
12/14/11 |
Connecting the EOC Signal of Del-Sig ADC to a Digital o/p pin in PSoC3
When EOC pin of Delta-Sigma ADC of PSoC3 is connected to a Digital Output Pin, I'm not able to view the EOC signal on the pin. Why? |
06/25/11 |
Over Sampling Ratios supported by PSoC 3/5 Del-Sig ADC
What are the Over-Sampling Ratios (OSR) being supported by PSoC 3/5 Delta-Sigma ADC? |
06/25/11 |
How do I Couple an AC Sine Wave Into the PSoC?
How do I Couple an AC Sine Wave Into the PSoC? |
06/27/11 |
Wrong ADC Output - Possible Causes
Even though there is a change in the input signal, the ADC output does not change. What could be the reason for this? |
06/26/11 |
Importance of Coherency register - 16 bit data transfer from ADC to DFB using DMA in PSoC 3/5
What is coherency byte in ADC result register and DFB staging/holding register? |
03/06/12 |
Connecting an Analog Signal on P0[x] to an ADC
How do I connect a signal from and analog input pin on Port0 to an ADC? |
06/26/11 |
PSoC3 Del Sig ADC produces full scale value when inputs are shorted
When the PSoC3 Del Sig ADC is configured in singled ended mode, why does the ADC produce near full scale value when I short the ADC inputs? |
03/02/11 |
PSoC 3/5 Del-Sig ADC Resolution and Sample Rate
How does the resolution of the PSoC 3/5 Del-Sig ADC affect the sampling rate? |
03/14/11 |
Maximum Gain achievable with the PSoC 3/5 Del-Sig ADC
What is the maximum gain that can be achieved with the PSoC 3/5 Del-Sig ADC? |
03/14/11 |
Multiplexing Analog inputs to an ADC in PSoC 3/5
How do I multiplex analog inputs to the ADC in PSoC 3/5? |
03/03/11 |
Measuring Differential Signals in PSoC 3/5
Is it possible to measure differential input signals in PSoC 3/5? |
03/29/11 |
ADC Sample Window and Noise Rejection
How do I select the ADC sample window for rejecting certain noise frequencies, for example power supply noise? |
03/27/11 |
Incorrect results from ADCs while debugging
Why do analog to digital converter (ADC) user modules return inconsistent and/or incorrect values when using the debugger to go through the code step-by-step, even when the measured voltage is a known, constant value? |
03/26/11 |
Differential Amplifier in PSoC 3/5
How do I build a differential amplifier in PSoC 3/5? |
09/12/11 |
Configuring Reference to an ADC in PSoC1
What are the different reference voltages that can be selected for an ADC measurement? Is it possible to configure an ADC to take an external reference? |
02/26/11 |
ADCINC clock
Is the value set in the ‘Dataclock’ parameter tab of the ADCINC module common for both the Digital and Analog blocks of the ADCINC ? |
03/27/11 |
ADC Errors and Techniques to Compensate these Errors
What are the offset and gain errors in PSoC ADCs? How do I reduce these errors and improve the accuracy of an ADC? |
03/24/11 |
ADC Stuck in Conversion
The ADC is getting stuck in the conversion process. The program gets stuck waiting for the ADC_fIsDataAvailable function to return a non-zero value. What could be the reason? |
02/27/11 |
Delta-Sigma ADC resolution in PSoC 1
What are the various resolutions available in the Deltasigma ADCs? |
03/18/11 |
Using the Decimator with Dynamic Reconfiguration
Why does an ADC user module stop functioning properly when a loadable configuration is loaded? |
06/19/11 |
Parameters determining the minimum and maximum sample rate of PSoC 3/5 Del Sig ADC
What determines the minimum and maximum sample rate of PSoC 3/5 Del Sig ADC? |
03/29/11 |
DELSIG ADC - Multiple Instances
Can we have multiple instances of DELSIG ADC in a configuration in PSoC1? |
02/26/11 |
Calculating the maximum input signal frequency of Del Sig ADC from the configuration parameters or vice versa in PSoC 3/5?
How to calculate the maximum input signal frequency for Delta-Sigma ADC from the configuration parameters in PSoC 3/5? |
03/03/11 |
Measuring a microvolt signal using PSoC1
Can we measure a micro volt signal using PSoC1? |
12/05/11 |
ADC Conversion Time
What is the conversion time for DELSIG11 and ADCINC12? |
03/26/11 |
Power supply ripple effect on internal reference of PSoC 1
How does the power supply ripple affect the internal reference of PSoC 1 ? |
03/26/11 |
Changing clock phase of an ADC dynamically
How do I change the ClockPhase parameter of an ADC dynamically? |
03/24/11 |
Implementing Capsense CSD and ADC simultaneously
I would like to implement Capsense CSD and ADCINC/DelSig ADC simultaneously in a PSoC1, but PSoC Designer does not allow this. How do I implement both the functions ? |
03/24/11 |
Analog Performance of the DVK - CY8CKIT-001
What is the Analog performance of the DVK - CY8CKIT-001 ? |
03/14/11 |
Number of DelSig ADCs available in a PSoC 3/5 project
In PSoC 3/5 devices how many DelSig ADCs can be placed on a single chip? |
06/12/11 |
ADC Reference Options
How to I select the Reference for my ADC in PSoC Designer? |
03/26/11 |
Connecting ADCs to Port Pins
How do I Connect an ADC to Port Pins? |
11/30/10 |
ADC produces wrong values when program is halted while debugging
While debugging a project with ADC, I place a breakpoint after the ADC result is read. The ADC produces wrong results. What is the reason for this behavior and what is the solution? |
12/05/10 |
ADC gives incorrect value when CapSense is enabled
When input to an ADC is taken from a MUX bus and if CapSense is enabled, the ADC produces incorrect results? What is the reason for this error and how can this be corrected? |
03/13/12 |
ADCINC in CY8C20xx6
When ADCINC is placed in PSoC Designer, why does it not consume any block? |
12/08/10 |