Cypress Perform

Home > Support
support.cypress.com     Bookmark and Share
Support

Knowledge Base Article



Programming PSoC® 3 First Touch Starter Kit CY8CKIT-003 - KBA83430

Last Updated: 11/20/2012
Question: Do I need to purchase a MiniProg3 to program the PSoC 3 First Touch Starter Kit CY8CKIT-003?

Answer: No. A MiniProg3 is not required to program the PSoC 3 First Touch Starter Kit. The kit has an on-board programmer to program the PSoC 3 on the kit. The programming is done based on the serial wire debug (SWD) Protocol. The kit has on-board SWD/USB converter, so we can program it using the USB cable. The figure shows the port provided in the kit for connecting USB cable.

Related Categories: PSoC® 3



Provide feedback on this item to help us improve:

How likely are you to recommend this article to a friend or colleague?

Not at all likely
0
1
2
3
4
5
6
7
8
9
10
Extremely likely

Was this item helpful?
Yes
No
Maybe


Additional comments:

Email:

Sunset Owner: HIMA; Secondary Owner: HIMA; Sunset Date: 05/19/13