Knowledge Base Article
Answer: There is no option to set the ‘Slider Resolution’ parameter in PSoC Designer GUI, for devices belonging to CYONS series. Hence, to set the slider resolution parameter for these devices, the ‘Generate Project’ icon must be clicked. Once the relevant APIs and .asm files are attached to the project, CSA_HL.asm file must be opened and the portion stating CSA_SLIDER_RESOLUTION_TABLE: @SliderResolutionTable must be replaced by CSA_SLIDER_RESOLUTION_TABLE: dw 0x64. Here, the value 64 indicates a slider resolution of 100 represented in HEX. You may type the resolution of your choice in HEX. Once the modification is made, the file must be saved and built using ‘Build project’ icon. You may also do the same by pressing F7. After modification, the ‘Generate Project’ icon must not be clicked as it would remove the modification made.