Cypress Perform

Home > Support & Community
support.cypress.com     Bookmark and Share
Support & Community

Knowledge Base Article



Minimum Pulse Width to Generate a GPIO Interrupt in Port Expander

Last Updated: 12/14/2009

Question: What should be minimum pulse width on a GPIO for an interrupt event to be captured in Port Expander CY8C9560?

Response: The port expander firmware polls I/O pins and then sets register values and INT line status. The minimum pulse length that can be detected in this way should be greater than polling interval which is about ~4mS.




Provide feedback on this article

Did this article help you solve your problem?

Yes

No

Maybe

Additional comments:

To protect your privacy, do not include contact information in your feedback.

Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20
Spec No: None; Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20