Cypress Perform

Home > Support & Community
support.cypress.com     Bookmark and Share
Support & Community

Knowledge Base Article



Flash read/write access from firmware in PSoC1 devices

Last Updated: 10/12/2011

How Can we read and write to flash in the PSoC1 devices?

In PSoC designer 3.20 or newer, you can add an EEPROM user module, which allows you to read and write Flash as a non-volatile data memory. The user module has two input parameters, starting block ID and length of EEPROM. You can setup the EEPROM user module to be located in the flash, and you can use the EEPROM read and flash write APIs to read and write into the flash. Refer to the EEPROM user module datasheet and the code example.


Related Categories: PSoC® 1


Provide feedback on this article

Did this article help you solve your problem?

Yes

No

Maybe

Additional comments:

To protect your privacy, do not include contact information in your feedback.

Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20
Spec No: None; Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20