Cypress Perform

Home > Support
support.cypress.com     Bookmark and Share
Support

Knowledge Base Article



Which SMPTE standards does the original HOTLink family support/not support?

Last Updated: 11/29/2011

Title:
Which SMPTE standards does the HOTLink I family support/not support?

Questions:
- How can I use the HOTLink 1 parts in a SMPTE-259M application?
- Does Cypress have a part that supports the SMPTE 310M video standard?

Response:
Within the HOTLink I family of parts there is a SMPTE 259M video chipset. The CY7B9234/9334 (Transmitter/Receiver) and the CY7C9235/9335 (Srambler/Descrambler) provide a SMPTE 259M solution. These parts support the following Levels:
1. SMPTE 259M Level C (270 Mbps, 525/625component)
2. SMPTE 259M Level D (360 Mbps, 525/625component)

In addition, a cable driver and equalizer will need to be used. Information on how to use the HOTLink 1 parts in a SMPTE-259M application can be found in two application notes (links are attached below). Adaptive Equalizers and Cable Drivers can be purchased from National Semiconductor. The parts we recommend are:
CLC006 Serial Digital Cable Driver with Adjustable Outputs
CLC007 Serial Digital Cable Driver with Dual Complementary Outputs
CLC014 Adaptive Cable Equalizer for High-Speed Data Recovery


Neither the HOTLink product family nor any other Cypress products support the SMPTE 310M standard for the following reasons:

- SMPTE-310M uses bi-phase mark encoding, HOTLink uses the 8B/10B encoding scheme,
- SMPTE-310M requires a synchronous serial interface to carry MPEG-2 transport bit streams at rates of up to 40Mb/s, HOTLinks lowest serial rate is 50Mb/s therefore is not compliant.

For more detailed information please see the SMPTE-310M spec and compare it to HOTLink specifications.


Useful Link:
SMPTE HOTLink Transmitter/Receiver (CY7B9234 Datasheet)

SMPTE 259M/DVB-ASI Scrambler/Controller (CY7C9235A Datasheet)

SMPTE 259M/DVB-ASI Descrambler/Framer-Controller (CY7C9335A Data Sheet)

Implement a SMPTE 259M Serial Digital Interface Using SMPTE HOTLink and CY7C9235/9335 http://www.cypress.com/?rID=12997

CY7C9267 SMPTE 259M Evaluation Boards User's Guide http://www.cypress.com/?rID=12996


Keywords:
HOTLink 1, SMPTE, standards, support, CY7C9235, CY7C9335, CY7C9234, CY7C9334


Related Categories: Video (SMPTE) PHYs




Provide feedback on this item to help us improve:

How likely are you to recommend this article to a friend or colleague?

Not at all likely
0
1
2
3
4
5
6
7
8
9
10
Extremely likely

Was this item helpful?
Yes
No
Maybe


Additional comments:

Email:

Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 09/15/11