Cypress Perform

Home > Support & Community
support.cypress.com     Bookmark and Share
Support & Community

Knowledge Base Article



enCoRe II and enCoRe III --- USB certified?

Last Updated: 01/01/2012

Are the enCoRe II and enCoRe III USB certified? What are their Test IDs (TIDs)?

Yes, the enCoRe II and enCoRe III devices are USB-IF certified. Cypress gets its devices (silicon - chips) USB-IF certified through a 3rd party test house or at PlugFest.

The enCoRe II and enCoRe III devices get certified under 'silicon building blocks' in the development category. There is also an option to search for 'retail categories' where you can find certification information for consumer/retail products.

In addition Cypress also gets USB certification for complete systems like Reference Design Kits (RDKs), Evaluation Kits(EVKs) etc. Certification for systems (RDKs etc) and silicon (chips) have different requirements and can be found on www.usb.org

Every device that passed USB comliance tests will be assigned a test ID or TID number and gets listed on the usb.org website. enCoRe II silicon has 2 TIDs (the 63310 and the 638xx are from the same die and the 639xx is from a different die). Also different silicon revisions of the same device are certified separately.

enCoRe II - TIDs
CY7C638xx/CY7C63310: 40000085
CY7C639xx:           40000005

enCoRe III - TIDs
CY7C64215:           40000110


Related Categories: USB Low-Speed Peripherals, USB Controllers, USB Full-Speed Peripherals


Provide feedback on this article

Did this article help you solve your problem?

Yes

No

Maybe

Additional comments:

To protect your privacy, do not include contact information in your feedback.

Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20
Spec No: None; Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20