Cypress Perform

Home > Support & Community
support.cypress.com     Bookmark and Share
Support & Community

Knowledge Base Article



Comparator Generating Multiple Interrupts

Last Updated: 08/03/2012

My comparator is triggering multiple interrupts. What could be the reason and how to prevent the same?

The multiple comparator triggering is caused by noise at the comparator signal inputs (either signal or reference). Because of this noise, the output of the comparator will oscillate when the input is near the reference threshold.  This oscillation will generate multiple interrupts on the comaprator bus.  The best way to eliminate this problem is to use the hysteresis comparator. For more information please refer to the following application notes.

AN2310 - Comparator with Independently Programmable Hysteresis Thresholds

AN2161 - Voltage to Frequency Converter

AN2156 - A Switched Capacitor Comparator with Programmable Hysteresis


Related Categories: PSoC® 1


Provide feedback on this article

Did this article help you solve your problem?

Yes

No

Maybe

Additional comments:

To protect your privacy, do not include contact information in your feedback.

 Help us improve by taking a brief survey
Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20
Spec No: None; Sunset Owner: KXP; Secondary Owner: VWA; Sunset Date: 06/15/20