Support & Community - Cypress Semiconductor

Knowledge Base Search

Selected Type: All Knowledge Base Types
Keyword:	Product:	Application:

Results 1 - 25 of 26

1 2 Next >

Title	Customer Rating	Updated
Cannot connect to the PLC device error in the PLC Control Panel What should I check for when the PLC Control Panel cannot connect to the PLC device?	Not yet rated	12/05/11
PLT and CYFISNP user modules resource conflict I can’t place the PLT and CYFISNP user modules in the same configuration. I receive a message “Unable to place CYFISNP User Module because of current resource allocation”. How do I use these two modules together?	Not yet rated	12/05/11
Band in Use timeout during transmission on the powerline What should I do if the BIU continuously times out while trying to transmit a packet over the powerline?	Not yet rated	12/05/11
Jumper usage on the PLC evaluation and development kits Describe the jumpers on the various PLC boards and explain their usage.	Not yet rated	12/05/11
Physical Addressing vs. Logical Addressing for Powerline Communication What is the difference between physical and logical addressing? When would I use one over the other?	(5/5) by 1 user	12/05/11
Transformer Options for the PLC High Voltage Reference Design Do you have any options for the transformers used in the PLC High Voltage Reference Design?	Not yet rated	12/05/11
CENELEC frequency band supported by the Cypress PLC High Voltage Solution What European CENELEC frequency band does the Cypress PLC High Voltage Solution support?	Not yet rated	12/05/11
Communication distance of the Cypress PLC High Voltage Solution What is the longest distance that the Cypress PLC High Voltage Solution can communicate over?	Not yet rated	12/05/11
Transmitting between phases using PLC Can the PLC signal transmitted from one phase be received by a node on another phase?	Not yet rated	12/05/11
Maximum and minimum input pin hysteresis for powerline communication products What is the maximum and minimum input pin hysteresis for the powerline communication products?	Not yet rated	12/05/11
PLC communication when the powerline is off With the PLT transceiver, would the communication still work if the power on the powerline goes off?	(5/5) by 1 user	12/05/11
Time between calls to PLT_Poll How often do I need to call the PLT_Poll() function?	Not yet rated	12/05/11
Clocking Options for the PLT user module What are the available clocking options for the PLT user module?	Not yet rated	12/05/11
Setting the parameters for the PLT user module How do I set the parameters in the PLT user module?	Not yet rated	12/05/11
License Key for PLT user module When I try to place the PLT user module, I am asked for a license key. How do I get this key?	(5/5) by 4 users	12/05/11
Sending instant messages using Control Panel GUI How does the Control Panel GUI work for instant messages?	Not yet rated	12/05/11
Load/Save configuration in the Control Panel GUI How does the load/save configuration in the Control Panel GUI work?	Not yet rated	12/05/11
Controlling more than 2 PLC nodes using the Control Panel GUI How can I control more than 2 PLC nodes using the Control Panel GUI on 1 PC?	Not yet rated	12/05/11
Use of Control Panel GUI Where can I use the Control Panel GUI?	Not yet rated	12/05/11
CY8PLC10 temporarily stalls I2C when transmitting I am communicating properly with CY8CPLC10 over I2C, and sending PLC message over the powerline. During transmission, I am polling the status register (0x69) to see when it is complete. During this time, the CY8CPLC10 does not complete the I2C Stop protocol - it holds the SCL line low until the transmission is completed. Is this correct operation?	Not yet rated	11/14/11
Moisture Sensitivity Level (MSL) of Cypress Parts How do I find Moisture Sensitivity Level (MSL) of Cypress parts?	Not yet rated	09/08/11
Making the PLC Control Panel work with the CY3274 and CY3275 boards How do you get the PLC Control Panel to work with the CY3274 and CY3275 boards?	Not yet rated	09/01/11
Board modifications to potentially improve the powerline communication performance of the low-voltage PLC boards (CY3273, CY3275) Are there any board modifications that I can make to the low-voltage PLC boards (CY3273, CY3275) to improve powerline communication performance?	Not yet rated	09/01/11
Optimum settings of the PLC device to get the best powerline communication performance What are the optimum settings of the PLC device to get the best powerline communication performance?	Not yet rated	09/01/11
Pin description of 20 pin Hirose connector in CY3250 flex cable Provide the pin description of 20 pin Hirose connector in CY3250 flex cable.	Not yet rated	12/05/10

Results 1 - 25 of 26

1 2 Next >

Cypress Perform