Cypress Perform

Home > Support & Community     Bookmark and Share
Support & Community

Knowledge Base Search

Selected Type:  All Knowledge Base Types

Keyword: Product: Application:  
Results 1 - 25 of 139 2   3   4   5   6   Next >
Title Updated
Configuring a CY8C201xx Device for Use Either with External Pull-ups or With a Master Operating at Different VDD – KBA80735
Question: What action must be taken to use a CY8C201xx device either with external pull-ups or with a master operating at different VDD?
Resources Available for CapSense® Controllers – KBA92181
Question: Where can you find a comprehensive list of resources that you can use to design applications using CapSense® Controllers?
Variation of Parasitic Capacitance (CP) Between Segments in a Slider Design Using Dual IDAC Mode – KBA91404
Question: How much parasitic capacitance (CP) can vary from one segment to another segment in a slider design using dual IDAC mode?
CY3217-MiniProg1 Electrostatic Discharge Resistance – KBA83013
Question: How resistant is the CY3217-MiniProg1 kit to electrostatic discharge (ESD) noise?
Country of Diffusion Versus Country of Origin – KBA93318
Question: What is the difference between Country of Diffusion and Country of Origin?
Vapor Phase Build Process for Cypress Products – KBA93319
Question: Can Cypress products be used in a vapor phase build process?
Mean Time to Failure Versus Mean Time Between Failure – KBA94271
Question: What is the difference between Mean Time to Failure (MTTF) and Mean Time Between Failure (MTBF)?
International Labor and Human Rights Standards – KBA81321
Question: What is Cypress’s position on international labor and human rights standards?
Addressing Multiple CY8CMBR3xxx CapSense® Express™ Devices on the Same I2C Bus – KBA90792
Question: How can you address multiple CY8CMBR3xxx CapSense® Express™ family devices on the same I2C bus?
MiniProg3 Programming in XRES Mode – KBA82808
Question: Why is the MiniProg3 not able to program the board in XRES mode even though the board is powered externally?
Proximity sensing using CSD
How to configure a proximity sensor with CSD UM?
The Measured Current Is Smaller Than Set in the CapSense® User Modules and IDACL_D/IDACR_D Registers – KBA92751
Question: The measured current is smaller than the current set in the CapSense® User Modules and IDACL_D/IDACR_D registers on the CY8C21x45, CY8C22x45, and CY8C28xxx devices. What is the reason for this and what is the workaround?
Capacitive Proximity Sensing – KBA92366
Question: How do you implement capacitive proximity sensing using the CY8C21x34 device?
Accuracy of CapSense® Controllers - KBA82716
Question: What is the measurement accuracy of CapSense® controllers?
No Provision in PSoC® Designer™ 5.4 to Provide Number of Spaces for Indent/Tab – KBA91230
Question: How do you set the number of spaces for indent/tab in PSoC® Designer™ 5.4?
Operating Voltage Range for CY8CMBR3xxx Family of CapSense Express Devices - KBA90791
Question: What is the valid operating voltage range for the CY8CMBR3xxx family of CapSense Express devices?
Slider Diplexing in CY8C3106S CapSense® Express Devices - KBA90793
Question: Do CapSense Express devices support Diplexing?
Resetting the Sensor Baseline With CY8CMBR3xxx CapSense® Express Devices - KBA90794
Question: Can I force a sensor’s baseline to reset using the host with a CapSense® Express CY8CMBR3xxx family of devices?
Sensor Dimensions of CY8CMBR3xxx CapSense® Express™ Devices - KBA90795
Question: How do I find out the dimensions of a sensor that I want to use in my design?
Tuning the MBR3xxx CapSense® Controllers - KBA90796
Question: How do I tune the capacitive sensors of the CY8CMBR3xxx CapSense controllers?
Controlling the Digital Outputs of MBR3xxx CapSense® Express Devices - KBA90797
Question: How do I control the digital outputs of the CY8CMBR3xxx family of CapSense devices?
Communication Interface Supported by CY8CMBR3xxx CapSense® Express Devices - KBA90798
Question: What is the communication interface supported by the CY8CMBR3xxx family of CapSense controllers?
Addressing multiple capsense express devices on the same I2C bus
How to address multiple Capsense Express devices on the same I2C bus ?
POR default Data structure table
What is the format of the ‘POR default Data structure table’ to be used with the command code ‘03’ for CY8C201xx series?
Air Gap between Capsense Button and Overlay Material
I have an application which as an air gap between Capsense button and Overlay Material. Are there any good solution to increase the sensitivity?
Results 1 - 25 of 139 2   3   4   5   6   Next >
Sunset Owner: RAIK; Secondary Owner: GRAA;