Cypress Perform

Home > Support & Community
support.cypress.com     Bookmark and Share
Support & Community

Knowledge Base Search



Selected Type:  All Knowledge Base Types

Keyword: Product: Application:  
Results 1 - 25 of 58 2   3   Next >
Title Customer Rating Updated
Using Breakout Boards to Enable Lighting Protocols on the CY3267 PowerPSoC® Lighting Evaluation Kit – KBA90579
Question: How do I enable lighting protocols on the CY3267 PowerPSoC Lighting Evaluation Kit by using commercially available breakout boards?

Not yet rated
01/13/14
Knowledge Base – Cypress Semiconductor Cage Code – KBA89258
Question: What is Cypress Commercial and Government Entity Code or CAGE CODE?

Not yet rated
09/27/13
Recommended Kelvin Connection for Current Sensing in PowerPSoC - KBA83444
Question: What is the correct way to connect Kelvin sense lines for accurate current sensing in PowerPSoC?

Not yet rated
01/03/13
Cypress Survey Dialog Box
A mysterious survey dialog box keeps popping up on my machine? What is this?

Not yet rated
06/04/12
PowerPSoC® – Improving IMO Frequency Accuracy over a Wide Temperature Range
What is the accuracy of PowerPSoC Internal Main Oscillator and how to minimize its variation with temperature drift ?

Not yet rated
03/01/12
Using CapSense® Buttons for LED Control on the CY3267 PowerPSoC® Evaluation Kit
How to use the CapSense button for LED control on the CY3267 PowerPSoC® Evaluation Kit?

Not yet rated
02/16/12
PowerPSoC® – Measuring Channel Current Using the Analog Input Multiplexer (AINX)
How to measure channel current using the Analog Input Multiplexer (AINX)?

Not yet rated
02/16/12
Saturation current rating of Inductor used to set-up the built-in switching regulator
Why is the saturation current rating of Inductor used to set-up the built-in switching regulator for PowerPSoC devices equal 1.5A?

Not yet rated
01/02/12
Affect of traces connecting the current sense resistors on current measurement accuracy
Do the traces connecting the current sense resistors affect current measurement accuracy?

Not yet rated
12/05/11
DALI Interface Board
Is the DALI interface board mentioned in AN52525-Implementing a DALI Receiver System Using PowerPSoC available for purchase as a kit?

Not yet rated
12/05/11
Debugging Pods for the EZ Color and Power PSoC Devices
What are the pods to be used for debugging EZ-Color and PowerPSoC devices?

Not yet rated
12/05/11
Demo Firmware for CY3269N kit
Where I will get the demo firmware for CY3269N?

(1/5) by 1 user
12/05/11
ColorLock Monitor Application of CY3263-ColorLock Evaluation board
Where I will get ColorLock Monitor application of CY3263-ColorLock Evaluation board?

Not yet rated
12/05/11
Minimum On/Off timers in the Hysteretic Controller
What is the importance of minimum on/off timers in the Hysteretic Controller block?

Not yet rated
12/05/11
Rise time for High Voltage input power rail to the Built-in Switching Regulator
What is the min/max rise time for High Voltage input power rail to the Built-in Switching Regulator?

Not yet rated
12/05/11
Built-in Switching Regulator of the CY8CLED0xD/G0x
Am I required to use the Built-in Switching Regulator of the CY8CLED0xD/G0x? If I am using the Built-in Switching Regulator, do I still connect the Vdd and AVdd? What are the component values used for the Built-in Switching Regulator?

Not yet rated
12/05/11
PowerPSoC Maximum Burn-In Temperature
What is the maximum burn-in temperature for the board once the PowerPSoC device is assembled on it?

Not yet rated
12/05/11
Selecting a current sense resistor for the PowerPSoC
How do I select a current sense resistor for the PowerPSoC?

Not yet rated
12/05/11
Using PowerPSoC with input voltage greater than 32V
Can the PowerPSoC be used with input voltage greater than 32V?

Not yet rated
12/05/11
The PowerPSoC SREG specifies a 10uF X7R grade ceramic capacitor with a minimum ESR of 0.1 ohm for C1
Why does the PowerPSoC SREG specify a 10uF X7R grade ceramic capacitor with a minimum ESR of 0.1 ohm for C1?

Not yet rated
12/05/11
Selecting a ripple current when DC current is required through the LED string
Why do I need to select a ripple current when I want DC current through the LED string?

Not yet rated
12/05/11
Maximum ramp time allowed for voltage on input rail
What is the maximum ramp time allowed for voltage on input rail?

Not yet rated
12/05/11
Built-in Switching Regulator of the CY8CLED0xD/G0x
Am I required to use the Built-in Switching Regulator of the CY8CLED0xD/G0x?

Not yet rated
12/05/11
Kelvin connections for Sense resistor
Why use Kelvin connections for Sense resistor?

Not yet rated
12/05/11
Error while programming CY8CLED08
When trying to program the CY8CLED08-28PVXI with PSoC programmer 3.11, the following error is thrown: Error shown: “PSoC Device (08 0B 22 10) is not in the Database” What is the workaround?

Not yet rated
12/05/11
Results 1 - 25 of 58 2   3   Next >
Sunset Owner: RAIK; Secondary Owner: GRAA;