Cypress Perform

Home > Support
support.cypress.com     Bookmark and Share
Support

Knowledge Base Search



Selected Type:  All Knowledge Base Types

Keyword: Product: Application:  
Results 1 - 25 of 32 1  2   Next >
Title Customer Rating Updated
Footprint / Landpattern of an SRAM?
Where can i get recommended footprint / Landpattern for standard packages?
Not yet rated 		09/12/12
Why do your address pins not match Samsungs or other vendors?
Parts by other vendors are obsolete. In the Cypress equivalent part the address and data lines are different. Can i use Cypress part without changes in firmware?
Not yet rated 		04/16/12
Vss and Vcc clarification
Which pin is ground: Vcc or Vss?
Not yet rated 		03/13/12
Floating data input on CMOS SRAM
I used a SRAM which has a x32 configuration and now I am forced to use a x36 configuration. I have the 4 unused inputs floating. Is this okay?
Not yet rated 		03/13/12
Do Address pins have internal Pull-up or Pull-down circuits?
Do you have internal pullups or pulldowns on your address pins so that they may be left floating?
Not yet rated 		03/13/12
Do you have Land Patterns or layouts
Do you have a recommended land pattern for my Cypress device?
Not yet rated 		03/13/12
Does
What does the 'T' at the end of some part numbers mean?
Not yet rated 		03/13/12
How to Submit Parts for FA
How can I send a device in for failure analysis?
Not yet rated 		03/13/12
Moisture Sensitivity Level (MSL) of Cypress Parts
How do I find Moisture Sensitivity Level (MSL) of Cypress parts?
Not yet rated 		09/08/11
cross-section drawings and thickness ?
Where do I Request a cross-section drawing with layers labeled and nominal thickness that can be identified?
Not yet rated 		06/26/11
SRAM Environmental Testing
Where is the environmental and mechanical testing data available.
Not yet rated 		06/20/11
SRAM powerup data output
If a read occurs on power up of an SRAM device, does the memory deliver highs, lows or high-z, since no data was ever loaded into the memory.
Not yet rated 		04/04/11
tLZOE and tHZOE demystified
Timing specification on some datasheets mentions timings tLZOE(min) and tHZOE(max) as 5 and 20 ns respectively. But foot note 15 mentions at any given temp and voltage tHZOE is less then tLZOE. Please clarify the interpretation of this?
Not yet rated 		04/04/11
UL94V-0_compliance
Are all of your devices UL94V-0 compliant?
Not yet rated 		04/04/11
Extra 4 or 2 bits if 32/16 bits are used in x36/x18 part.
what do I do with the extra 4 or 2 bits if I want to use only 32/16 bits in a X36/X18 part?
Not yet rated 		04/04/11
Ram 4 and Ram 5 on your Reliability report
What does Ram 4 and Ram 5 on your Reliability report mean?
Not yet rated 		04/04/11
extra 2 bits for parity check?
Why do we have 2 extra bits for parity checking.
Not yet rated 		04/04/11
Mean time between failures?
How to calculate mean time between failures (MTBF)?
Not yet rated 		04/04/11
Parity during read and write
How is parity generated during reads and write?
Not yet rated 		04/04/11
Failure In Time (FIT)
Where do I find the FIT value for a particular device?
Not yet rated 		04/04/11
Qualification Report (QTP)
How do I find a Qualification Report for a particular device?
Not yet rated 		04/04/11
Pb-Free option of SRAMs
What are the differences in reflow/assembly process required by Pb-Free devices?
Not yet rated 		03/26/11
Operation of devices outside specified temperature range
Will Cypress devices work outside the temperature range specified?
Not yet rated 		03/05/11
SRAM models link
Where can I find the models for a particular part on the web?
Not yet rated 		03/05/11
SRAM tape and reel requirement
What is the tape and reel requirement for Cypress SRAM's?
Not yet rated 		03/05/11
Results 1 - 25 of 32 1  2   Next >