|
Title
|
Customer Rating
|
Updated
|
Using Math functions in PSoC Creator for PSoC 5's GCC Compiler
How do I use Math functions in PSoC Creator for PSoC5's GCC Compiler?
|
(5/5) by 7
users
|
04/09/13 |
Creating First Order IIR Lag Filters in the PSoC® 3 and PSoC 5 Filter Component - KBA85693
Question: How can I implement first order IIR lag filters in the PSoC® 3 and PSoC 5 Filter component?
|
Not yet rated
|
03/21/13 |
One Shot PWM in PSoC® 3 and PSoC 5 - KBA85546
Question: How do I create a one shot pulse width modulator (PWM) in PSoC® 3 or PSoC 5?
|
Not yet rated
|
03/15/13 |
Basics of Verilog and datapath configuration tool for component creation
What is the Datapath configuration tool?
|
Not yet rated
|
03/13/13 |
Using Variables Stored in Flash in PSoC® 3 and PSoC 5 Bootloadable Projects - KBA82443
Question: When I change the value of variables stored in flash in a bootloadable project, the PSoC® gets stuck in the bootloader code on subsequent power-up or RESET. What is the reason for this?
|
Not yet rated
|
01/31/13 |
Comparison of Resource Utilization Between PSoC® 3, PSoC 5 and PSoC 5LP UDBs and Other Vendor CPLDs - KBA85325
Question: How do PSoC UDBs compare with other vendor CPLDs for logic utilization of common functions?
|
Not yet rated
|
01/18/13 |
CY8CKIT-050 PSoC® 5 Development Kit MHz Crystal- KBA82852
Question: Why do USB/UART-related projects using CY8CKIT-050 not work when I update to PSoC Creator 2.0 or later version?
|
Not yet rated
|
01/03/13 |
USB, CAN and UART projects for PSoC 5 CY8CKIT-050 and CY8CKIT-010 require MHz ECO - KBA84754
Question: Why don’t PSoC 5 projects using USB, CAN, and UART on the CY8CKIT-050 and CY8CKIT-010 work without the MHz ECO enabled as a clock source?
|
Not yet rated
|
12/20/12 |
PSoC® 3, PSoC 5, and PSoC 5LP Breakpoints and Watchpoints - KBA84801
Question: How many breakpoints and watchpoints are supported in PSoC® Creator™ for PSoC 3, PSoC 5, and PSoC 5LP?
|
Not yet rated
|
12/19/12 |
Documentation and Training for PSoC® Creator™ Component Development - KBA80958
Question: What documents and training are available for PSoC® Creator™ component development?
|
Not yet rated
|
12/19/12 |
Human Body Model - KBA84770
Question: What is the human body model?
|
Not yet rated
|
12/10/12 |
Using the PSoC 5 MHz ECO on CY8CKIT-050 and CY8CKIT-010 - KBA84757
Question: How should the PSoC 5 kit hardware and firmware be configured to use the MHz ECO?
|
Not yet rated
|
12/10/12 |
VDAC8 Output Voltage in PSoC® 3 and PSoC 5 - KBA84732
Question: The VDAC8 output does not go beyond 2.4 V even when the VDAC8 range is set to 4.080 V in PSoC® 3 and PSoC 5. What is the solution for this?
|
Not yet rated
|
12/07/12 |
Obsolete 48-pin SSOP PSoC® 5 Devices - KBA84779
Question: Do the PSoC® 5 and PSoC 5LP device families support 48-pin SSOP packages?
|
(1/5) by 1
user
|
12/07/12 |
Selecting a PSoC® Part Number for Your PSoC Creator™ Project - KBA84774
Question: How do I select the desired PSoC® part number for my application note example project in PSoC Creator™?
|
Not yet rated
|
12/07/12 |
PSoC® 5 Pin Packages - KBA84775
Question: Where can I find the available PSoC® 5 and PSoC 5LP pin packages?
|
Not yet rated
|
12/07/12 |
PSoC® Creator™ Version or Build Number in the .rpt File - KBA84777
Question: Can I find the PSoC® Creator™ version or build number from the .rpt file of a compiled project?
|
Not yet rated
|
12/07/12 |
Locating a Function in PSoC® 5 SRAM - KBA84773
Question: How do I tell the linker to place a function in RAM?
|
Not yet rated
|
12/07/12 |
STA Warnings IN PSoC® 3 ES3/Production Release Silicons- KBA 84739
Question: Why do I get Static Timing Analysis (STA) warnings in my design for PSoC® 3 ES3 and Production release silicons and PSoC 5LP? I do not get these warnings if I port the project to PSoC 3 ES2 or PSoC 5.
|
Not yet rated
|
12/06/12 |
Delay between Bytes when SPIM_PutArray API is used - KBA82854
Question: Why is there a delay between successive bytes when the SPIM_PutArray API is used?
|
Not yet rated
|
12/06/12 |
Application Note Projects Compatible with PSoC® Creator™ 2.1 SP1 - KBA84800
Question: How do I proceed with an application note project compatible with PSoC® Creator™ 2.1 SP1?
|
Not yet rated
|
12/06/12 |
PSoC® 3, PSoC 5, and PSoC 5LP AN Project File Naming Convention and Use – KBA84803
|
Not yet rated
|
12/06/12 |
PSoC® 5 and PSoC 5LP Flash Memory Organisation and Array ID Parameter - KBA 84740
Question: How is flash memory organized in PSoC® 5 and PSoC 5LP? How do we choose the array ID parameter for the CyWriteRowData API?
|
Not yet rated
|
12/06/12 |
Device Architecture and Silicon Revision of PSoC® 3, PSoC 5, and PSoC 5LP Devices - KBA 84743
Question: How do I identify the device architecture and silicon revision of PSoC® 3, PSoC 5, and PSoC 5LP devices?
|
Not yet rated
|
12/06/12 |
Supported Bootloaders in PSoC® 3, PSoC 5, and PSoC 5LP Devices - KBA 84744
Question: Which bootloaders do PSoC® 3, PSoC 5, and PSoC 5LP devices support in PSoC Creator?
|
(5/5) by 1
user
|
12/04/12 |
Number of I/O Pins in Non-USB PSoC® 3 and PSoC 5 Devices - KBA 84748
Question: In a PSoC® Creator™ project that uses non-USB PSoC 3 and PSoC 5 devices, why are there two additional I/O pins than what is actually used in the design?
|
Not yet rated
|
12/04/12 |
ADC Performance with External Reference in PSoC® 3 and PSoC 5 - KBA 84753
Question: Does an external reference improve ADC performance?
|
(3/5) by 2
users
|
12/04/12 |
Selecting the Desired PSoC® 3 or PSoC 5 Part Number for a Project in PSoC Creator™ - KBA84387
Question: How do you select the PSoC 3 or PSoC 5 part number you need for a project in PSoC Creator?
|
Not yet rated
|
12/03/12 |
Types of Memories Supported by PSoC® 3 or PSoC 5 EMIF - KBA83241
Question: What type of memories will be supported by EMIF component?
|
Not yet rated
|
11/28/12 |
ADC Performance with External Reference in PSoC® 3 or PSoC 5 – KBA83438
Question: Does an external reference improve the ADC performance?
|
Not yet rated
|
11/19/12 |
Connections on Vcca and Vccd Pins of PSoC® 3 and PSoC 5 - KBA83234
Question: Can the Vccd and Vcca pin on PSoC 3 and PSoC 5 be tied to an external voltage?
|
Not yet rated
|
11/19/12 |
Driving an External Load using VDAC in PSoC® 3 or PSoC 5 - KBA83238
Question: How do I directly drive an external circuit using VDAC in PSoC 3 or PSoC 5?
|
(5/5) by 1
user
|
11/19/12 |
PSoC Creator™ - Keil Compiler Registration - KBA83314
Question: How do I register the Keil compiler that comes with PSoC Creator?
|
(1.5/5) by 4
users
|
10/19/12 |
CY8CKIT-050 Voltage Display Does Not Vary with Potentiometer - KBA82298
Question: Why does my CY8CKIT-050 fail to show the voltage display varying with potentiometer as shown in the Quick Start Guide?
|
Not yet rated
|
10/10/12 |
Interfacing PSoC® 3/PSoC 5 with an Android Device - KBA83909
Question: Can the USB component in PSoC 3 work with an Android Device?
|
Not yet rated
|
10/10/12 |
Workaround to Avoid the Glitch Generated by LVI/HVI Circuits of PSoC® 3 or PSoC 5 After Power Up - KBA83204
Question: PSoC 3 and PSoC 5 TM device Technical Reference Manuals (TRMs), in the section, “Processing a Low/High Voltage Detect Interrupt” specify the glitch conditions. A glitch will be generated after the device is powered up and configured to LVI/HVI circuits to trigger an interrupt instead of device reset. What is the code snippet which can be used to avoid this glitch?
|
Not yet rated
|
10/08/12 |
PSoC® 5 TM Generates LVD Trigger after Every Wakeup Though Supply Voltage is Above the Threshold - KBA83200
Question: PSoC 5 TM is generating LVI/HVI trigger after every wake-up from Low Power mode (Sleep) even though the supply voltage is above the Threshold set for Low Voltage Detect (LVD) trigger and less than the default threshold set for High Voltage Detect (HVD). What is the workaround for this issue?
|
Not yet rated
|
10/08/12 |
Best Method of Amplification to get Better Performance from PSoC® 3 OR PSoC 5 Del Sig ADC - KBA81866
Question: What are the different possible methods of amplification available for using with PSoC 3 or PSoC 5 Del Sig ADC? What is the best method of them to get better performance?
|
Not yet rated
|
10/03/12 |
PSoC® 3 Boost Inductor Size - KBA80957
Question: What size inductor should I use for the PSoC 3 boost circuit?
|
Not yet rated
|
07/13/12 |
PSoC Creator hangs while loading on a machine having Kaspersky antivirus
Why is PSoC Creator identified as threat in Kaspersky antivirus?
|
Not yet rated
|
05/13/12 |
Gates in UDB Block of PSoC 3/5
How many gates does the UDB of PSoC 3/5 have?
|
Not yet rated
|
05/07/12 |
Accessing PSoC 3/5 Registers in Firmware
How do I access (Read/Write) the Registers of PSoC 3/5 in firmware?
|
Not yet rated
|
05/07/12 |
What wireless support is offered in conjunction with the CY8CKIT-001 PSoC1/3/5 DVK?
What wireless support is offered in conjunction with the CY8CKIT-001 PSoC1/3/5 DVK?
|
Not yet rated
|
05/07/12 |
PSoC 3 and PSoC 5 Application Note Finder
|
Not yet rated
|
04/17/12 |
PSoC5: Running Code out of RAM using the GCC compiler
How can I place code and interrupt handlers in RAM using the GCC compiler?
|
Not yet rated
|
04/06/12 |
Why am I getting the warning " ignoring changed section attributes for .data " ?
Why am I getting the warning " ignoring changed section attributes for .data " ?
|
Not yet rated
|
04/06/12 |
Importance of Coherency register - 16 bit data transfer from ADC to DFB using DMA in PSoC 3/5
What is coherency byte in ADC result register and DFB staging/holding register?
|
Not yet rated
|
03/06/12 |
Registration of Keil Compiler in PSoC Creator
How to register the default Keil compiler in PSoC Creator if normal registration using "Keil License Registration" window fails?
|
Not yet rated
|
02/27/12 |
Using DMA to transfer data to SPIM of PSoC 3/5 on TX_FIFO_NOT_FULL flag
SPI Master + DMA (rising edge trigger) configured to work on TX_FIFO_NOT_FULL flag is transmitting only the first data. Why?
|
Not yet rated
|
02/17/12 |
Difference between count & clock pins of PSoC 3/5 Counter component
What is the difference between count & clock pins of PSoC 3/5 Counter component?
|
Not yet rated
|
02/17/12 |