|
Title
|
Customer Rating
|
Updated
|
AN61102 - PSoC® 3 and PSoC 5LP - ADC Data Buffering Using DMA
Updated
AN61102 describes how to configure the direct memory access (DMA) to buffer the analog-to-digital converter (ADC) data. It discusses how to overcome some of the limitations of the DMA when buffering the ADC data.
|
(2.3/5) by 3
users
|
02/06/13 |
AN65977 - PSoC® 3 and PSoC 5LP - Creating an Interface to a TMP05/TMP06 Digital Temperature Sensor
AN65977 describes how to configure PSoC 3 applications to interface to an Analog Devices' TMP05 or TMP06 temperature sensor.
|
(4.7/5) by 12
users
|
02/04/13 |
AN66477 - PSoC® 3 and PSoC 5LP® - Temperature Measurement with a Thermistor
|
(3.7/5) by 3
users
|
01/29/13 |
AN73854 - PSoC® 3 and PSoC 5LP - Introduction to Bootloaders
AN73854 gives a brief introduction to bootloader theory and technology, and then shows how bootloaders are implemented in PSoC® 3 and PSoC 5LP devices, using PSoC Creator™. Topics include bootloader system description, features, and customization.
|
Not yet rated
|
01/18/13 |
AN79973 - PSoC3 and PSoC5 CapSense CSD - IEC 60730 Class B Safety Software Library
Guide to IEC60730 Class B compliance for the CapSense CSD component with PSoC 3 and PSoC 5 microcontrollers
|
(5/5) by 1
user
|
01/17/13 |
AN80248 - PSoC® 3 / PSoC 5LP: Improving the Accuracy of Internal Oscillators
AN80248 shows how to improve the accuracy of the PSoC® 3 or PSoC 5LP internal low-speed oscillator (ILO) and internal main oscillator (IMO) through run-time trim.
|
Not yet rated
|
01/14/13 |
AN52701 - PSoC® 3 and PSoC 5LP - Getting Started with CAN (Controller Area Network)
This application note introduces the basic concepts of CAN (Controller Area Network) and demonstrates how CAN bus communication is implemented using PSoC® 3 and PSoC 5LP.
|
(5/5) by 1
user
|
01/09/13 |
AN52705 - PSoC® 3 and PSoC 5LP - Getting Started with DMA
AN52705 provides an introduction to direct memory access (DMA) in PSoC® 3 and PSoC 5LP.
|
(5/5) by 2
users
|
01/07/13 |
AN54181 - Getting Started with PSoC® 3
PSoC® 1, PSoC 3, and PSoC 5LP are Programmable System-on-Chips that do everything a microcontroller does and more.
|
(4/5) by 10
users
|
01/03/13 |
AN73503 - USB HID Bootloader for PSoC® 3 and PSoC 5LP
A complete USB human-interface device (HID) bootloader solution for PSoC 3 and PSoC 5LP is provided in this Application Note. It describes how to add an USB bootloader to a PSoC 3 or PSoC 5LP project. It also discusses how to create your own bootloader GUI using visual C#. The GUI provided uses the HID interface for communication to perform the whole bootload operation.
|
Not yet rated
|
01/03/13 |
AN82250 - PSoC® 3 and PSoC 5LP Implementing Programmable Logic Designs with Verilog
AN82250 describes how to implement programmable digital logic designs in the PLD portion of PSoC® 3 and PSoC 5LP. It introduces the PSoC Universal Digital Blocks (UDBs) and their Programmable Logic Device (PLD) sub-blocks. An example project illustrates how you can use the PLDs in a design by creating Verilog-based components in PSoC Creator™.
|
(5/5) by 1
user
|
12/26/12 |
AN77900 - PSoC® 3 and PSoC 5LP Low-power Modes and Power Reduction Techniques
AN77900 is an introduction to the PSoC 3 and PSoC 5LP low-power modes and features. Major topics include PSoC power modes, power management API and registers, additional power-saving techniques, and other low-power mode considerations. The associated PSoC Creator project demonstrates these principles.
|
Not yet rated
|
12/26/12 |
AN70630 - Event Data Recorder with Controller Area Network using PSoC® 3 and nvSRAM
AN70630 describes how to combine PSoC® 3 with Cypress nvSRAM to build an event data recorder (EDR), which is finding increasing application in automotive. PSoC 3, with its controller area network connectivity and efficient data transfer using direct memory access, helps free the CPU to execute other tasks.
|
Not yet rated
|
12/20/12 |
AN82156 - PSoC® 3 and PSoC 5LP® - Designing PSoC Creator™ Components with UDB Datapaths
AN82156 explains how to design PSoC® Creator™ components that use PSoC 3 and PSoC 5LP® Universal Digital Block (UDB) datapath modules.
|
(4.7/5) by 6
users
|
12/18/12 |
AN58726 - PSoC® 3 / PSoC 5LP USB HID Intermediate (with Keyboard and Composite Device)
AN58726 covers the next level of human interface devices (HID) USB development on PSoC® 3 / PSoC 5LP discussing OUTPUT items using a keyboard and a composite device as example projects.
|
(5/5) by 1
user
|
12/18/12 |
AN56377 - PSoC® 3 and PSoC 5LP USB Transfer Types
AN56377 describes the four USB transfer types: Interrupt, Bulk, Isochronous, and Control.
|
(3.8/5) by 4
users
|
12/18/12 |
AN77835 - PSoC® 3 to PSoC 5LP Migration Guide
AN77835 provides an overview of topics to consider when designing a project for easy migration between PSoC® 3 and PSoC 5LP devices. Device considerations, PSoC Creator topics, and firmware porting are discussed.
|
Not yet rated
|
12/17/12 |
AN62582 - AM Modulation and Demodulation
AN62582 explains how to implement amplitude modulation (AM) and demodulation using PSoC® 3 and PSoC 5LP.
|
(3/5) by 1
user
|
12/12/12 |
AN70698 - PSoC® 3 and PSoC 5LP - Temperature Measurement with an RTD
AN70698 explains how to measure temperatures precisely using a four-wire resistance temperature detector (RTD)
|
(5/5) by 2
users
|
12/12/12 |
AN75511 - PSoC® 3 and PSoC 5LP - Temperature Measurement with a Thermocouple
AN75511 explains how to make precise temperature measurements using a Thermocouple and a PSoC® 3 or PSoC 5LP.
|
Not yet rated
|
12/12/12 |
AN2155 - PSoC® 1/3/5 - EMI Design Considerations for PSoC
AN2155 discusses designing PSoC mixed-signal array-based systems for compliance with EMC standards. This results in easier qualification of new designs and more robust low-cost system design.
|
(4.5/5) by 2
users
|
12/11/12 |
AN78175 - PSoC® 3 and PSoC 5LP - IEC 60730 Class B Safety Software Library
AN78175 describes the PSoC 3 and PSoC 5LP IEC 60730 Class B Safety Software Library and includes an example project with self-check routines to ensure reliable and safe operation.
|
Not yet rated
|
12/07/12 |
AN64275 - PSoC® 3 and PSoC 5LP Getting More Resolution from 8-Bit DACs
AN64275 demonstrates how to increase the resolution of the 8-bit DACs available in the PSoC 3 and 5LP devices up to 12-bits using additional PSoC resources.
|
(4.4/5) by 5
users
|
12/07/12 |
AN60321 - Peak Detection with PSoC® 3 and PSoC 5LP
AN60321 describes several techniques for implementing a peak detector in PSoC 3 and PSoC 5LP.
|
(5/5) by 3
users
|
12/06/12 |
AN82072 - PSoC® 3 and PSoC 5LP USB General Data Transfer with Standard OS Drivers
AN82072 discusses how to use PSoC 3 and PSoC 5LP devices to transfer generic data across USB using native OS drivers included with Windows, Mac OS, and Linux.
|
Not yet rated
|
12/06/12 |
AN58827 - PSoC® 3 and PSoC 5LP Internal Analog Routing Considerations
AN58827 discusses how internal trace and switch resistance can affect the performance of a design and how these issues can be avoided by understanding a few basic details about the PSoC® 3 and PSoC 5LP architecture.
|
(4/5) by 3
users
|
12/06/12 |
AN58304 - PSoC® 3 and PSoC 5LP - Pin Selection for Analog Designs
AN58304 assists the designer in making the best pin selection for both performance and resource utilization for the PSoC 3 and PSoC 5LP families.
|
(4/5) by 4
users
|
12/06/12 |
AN60220 - PSoC® 3 / PSoC 5LP Multiplexed Comparator
AN60220 describes how to multiplex the comparator for use with more than one input signal.
|
(5/5) by 1
user
|
12/06/12 |
AN57821- PSoC® 3 and PSoC 5LP Mixed Signal Circuit Board Layout Considerations
AN57821 introduces basic PCB layout practices to achieve 16 to 20 bit performance for the PSoC® 3 and PSoC 5LP family of devices. The design practices covered in this application note are good rules to use in any mixed signal design for any accuracy.
|
(5/5) by 1
user
|
12/06/12 |
AN73054 - PSoC® 3 and PSoC 5LP Programming Using an External Microcontroller (HSSP)
AN73054 shows how to apply C code to program PSoC® 3 / PSoC 5LP devices using an external microcontroller. This process is referred to as Host Sourced Serial Programming (HSSP), in which the host microcontroller programs PSoC 3 / PSoC 5LP through the serial wire debug (SWD) interface. The C code is written so it can be ported to any microcontroller with minimal changes, greatly reducing the time required to develop HSSP applications for PSoC 3 / PSoC 5LP.
|
Not yet rated
|
12/06/12 |
AN81623 - PSoC® 3 and PSoC 5LP Digital Design Best Practices
AN81623 gives a brief introduction to the digital hardware design theory and then describes the powerful and highly flexible digital subsystem in PSoC 3 and PSoC 5LP. It describes best practices for digital design using PSoC Creator, and shows how to use static timing analysis (STA) report files.
|
Not yet rated
|
12/05/12 |
AN60631 - PSoC® 3 and PSoC 5LP Clocking Resources
AN60631 covers PSoC® 3 and PSoC 5LP's highly versatile and reconfigurable clocking system.
|
(5/5) by 1
user
|
12/05/12 |
AN60594 - PSoC® 3 and PSoC 5LP: 1200 Baud FSK Modulation and Demodulation
AN60594 describes how to create a 1200-baud frequency shift keying (FSK) transmitter and receiver with PSoC® 3 and PSoC 5LP, with digital 0s represented by 2100 Hz, and digital 1s, represented by 1300 Hz. The transmitter is created using a sine table, DMA, and VDAC.
|
(5/5) by 1
user
|
12/05/12 |
AN60616 - PSoC® 3 and PSoC 5LP Startup Procedure
AN60616 describes PSoC® 3 and PSoC 5LP startup procedures, from the application of device power until the execution of user code. It describes how to customize the startup procedure, and includes the reasons a designer might want to change the startup procedure.
|
(5/5) by 1
user
|
12/05/12 |
AN54439 - PSoC® 3 and PSoC 5LP External Crystal Oscillators
AN54439 describes how to use an external crystal or ceramic resonator at 32.768 kHz or in the 4-25 MHz range in PSoC® 3 or PSoC 5LP. External crystal oscillators provide more accurate clock signals than the oscillators built into PSoC 3 and 5LP.
|
(3.9/5) by 11
users
|
12/05/12 |
AN69133 - PSoC® 3 / PSoC 5LP Easy Waveform Generation with the WaveDAC8 Component
AN69133 describes how the WaveDAC8 component works and how to use it to generate either predefined or custom waveforms.
|
(4.7/5) by 3
users
|
12/05/12 |
AN54460 - PSoC® 3 and PSoC 5LP Interrupts
AN54460 explains the interrupt architecture in PSoC® 3 and PSoC 5LP and the support for interrupts in the PSoC Creator™ IDE.
|
(4.5/5) by 4
users
|
12/05/12 |
AN60580 - SIO Tips and Tricks in PSoC® 3 / PSoC 5LP
AN60580 explains the following applications of SIO pins: Comparator, Charge pump, Level shifter, Half wave rectifier, Peak detector, and Sleep wakeup using SIO Comparator.
|
(3.5/5) by 2
users
|
12/05/12 |
AN68272 - PSoC® 3 and PSoC 5LP – Customizing the Bootloader Communication Channel
AN68272 describes how to customize the PSoC 3 and PSoC 5LP bootloader communication channel with UART as an example.
|
(5/5) by 1
user
|
12/05/12 |
AN60317 - PSoC® 3 and PSoC 5LP I2C Bootloader
AN60317 describes how to add an I2C bootloader to a PSoC® 3 or PSoC 5LP project.
|
(5/5) by 3
users
|
12/05/12 |
AN61290 - PSoC® 3 and PSoC 5LP Hardware Design Considerations
AN61290 reviews several topics for designing a hardware system around a PSoC® 3 or PSoC 5LP device. Subjects include power system, reset, crystal, and other pin connections, and programming and debugging interfaces. Also included are instructions on how to use PSoC Creator™ to configure the device for the hardware environment.
|
Not yet rated
|
12/05/12 |
AN73468 - PSoC® 3 and PSoC 5LP - Single-Cell Lithium-Ion (Li-ion) Battery Charger
AN73468 explains a single-cell Lithium-Ion (Li-ion) battery charger implementation using PSoC 3 or PSoC 5LP. Two types of implementations - linear and switching type are supported. An attached PSoC Creator project, which includes a charge display tool, demonstrates Li-ion battery charging.
|
Not yet rated
|
12/05/12 |
AN2099 - PSoC® 1, PSoC 3, and PSoC 5LP - Single-Pole Infinite Impulse Response (IIR) Filters
AN2099 describes a topology for a single-pole infinite impulse response (IIR) filter. It includes equations and software to implement this topology; the associated example projects give the user access to filter routines in either assembly or C.
|
(4.7/5) by 3
users
|
12/05/12 |
AN52927 - PSoC® 3 and PSoC 5LP - Segment LCD Direct Drive
Although segment LCD modules are available with inbuilt drivers, these modules are more expensive than segment LCD glass. PSoC® 3 and PSoC 5 LP, with its configurable analog and digital hardware, also has an integrated configurable LCD driver that supports a wide variety of LCD glass types. This application note explains how to drive multiplexed segment LCD glass using PSoC 3 and PSoC 5LP.
|
(5/5) by 1
user
|
12/05/12 |
AN60024 - Switch Debouncer and Glitch Filter with PSoC® 3 and PSoC 5LP
AN60024 introduces the concepts of switch debouncing and glitch filtering for digital input signals, and shows how to create several debounce and filter projects for PSoC® 3 and PSoC 5LP, using PSoC Creator™.
|
(5/5) by 1
user
|
12/05/12 |
AN66627 - PSoC® 3 and PSoC 5LP Intelligent Fan Controller
AN66627 describes how to configure PSoC 3 and PSoC 5LP applications to independently control up to 16 fans in a single device.
|
(5/5) by 2
users
|
12/05/12 |
AN68403 - PSoC® 3 and PSoC 5LP Analog Signal Chain Calibration
AN68403 explains how to calibrate an analog signal chain by using a calibrated delta sigma ADC and an on-chip EEPROM that is available in PSoC® 3 and PSoC 5LP.
|
Not yet rated
|
12/05/12 |
AN60590 - PSoC® 3 and PSoC 5LP - Temperature Measurement with a Diode
AN60590 explains the diode-based temperature measurement using PSoC® 3 and PSoC 5LP.
|
(3/5) by 2
users
|
12/05/12 |
AN66444 - PSoC® 3 and PSoC 5LP Correlated Double Sampling to Reduce Offset, Drift, and Low Frequency Noise
AN66444 describes the implementation of correlated double sampling (CDS) in PSoC ® 3 and PSoC 5LP, for DC offset cancellation and noise reduction.
|
(3.5/5) by 2
users
|
12/05/12 |
AN62510 - Implementing State Machines with PSoC® 3 / PSoC 5LP
The method to implement state machines using the PSoC® 3 / PSoC 5LP family of devices is explained in this Application Note. Mealy and Moore state machines implementations are shown with associated projects.
|
(4/5) by 1
user
|
12/05/12 |