|
Title
|
Customer Rating
|
Updated
|
Comparison of Resource Utilization Between PSoC® 3, PSoC 5 and PSoC 5LP UDBs and Other Vendor CPLDs - KBA85325
Question: How do PSoC UDBs compare with other vendor CPLDs for logic utilization of common functions?
|
Not yet rated
|
01/18/13 |
Using the printf Function in PSoC® 3 - KBA83472
Question: How do I use the printf function in stdio.h to send data to UART?
|
Not yet rated
|
01/08/13 |
PSoC® 3, PSoC 5, and PSoC 5LP Breakpoints and Watchpoints - KBA84801
Question: How many breakpoints and watchpoints are supported in PSoC® Creator™ for PSoC 3, PSoC 5, and PSoC 5LP?
|
Not yet rated
|
12/19/12 |
Documentation and Training for PSoC® Creator™ Component Development - KBA80958
Question: What documents and training are available for PSoC® Creator™ component development?
|
Not yet rated
|
12/19/12 |
VDAC8 Output Voltage in PSoC® 3 and PSoC 5 - KBA84732
Question: The VDAC8 output does not go beyond 2.4 V even when the VDAC8 range is set to 4.080 V in PSoC® 3 and PSoC 5. What is the solution for this?
|
Not yet rated
|
12/07/12 |
PSoC® Creator™ Version or Build Number in the .rpt File - KBA84777
Question: Can I find the PSoC® Creator™ version or build number from the .rpt file of a compiled project?
|
Not yet rated
|
12/07/12 |
PSoC® 3 and PSoC 5 BSDL Files - KBA84780
Question: Where are the JTAG BSDL files for PSoC® 3 and PSoC 5LP devices located?
|
Not yet rated
|
12/07/12 |
STA Warnings IN PSoC® 3 ES3/Production Release Silicons- KBA 84739
Question: Why do I get Static Timing Analysis (STA) warnings in my design for PSoC® 3 ES3 and Production release silicons and PSoC 5LP? I do not get these warnings if I port the project to PSoC 3 ES2 or PSoC 5.
|
Not yet rated
|
12/06/12 |
Delay between Bytes when SPIM_PutArray API is used - KBA82854
Question: Why is there a delay between successive bytes when the SPIM_PutArray API is used?
|
Not yet rated
|
12/06/12 |
PSoC® 3, PSoC 5, and PSoC 5LP AN Project File Naming Convention and Use – KBA84803
|
Not yet rated
|
12/06/12 |
Supported Bootloaders in PSoC® 3, PSoC 5, and PSoC 5LP Devices - KBA 84744
Question: Which bootloaders do PSoC® 3, PSoC 5, and PSoC 5LP devices support in PSoC Creator?
|
(5/5) by 1
user
|
12/04/12 |
Selecting the Desired PSoC® 3 or PSoC 5 Part Number for a Project in PSoC Creator™ - KBA84387
Question: How do you select the PSoC 3 or PSoC 5 part number you need for a project in PSoC Creator?
|
Not yet rated
|
12/03/12 |
Types of Memories Supported by PSoC® 3 or PSoC 5 EMIF - KBA83241
Question: What type of memories will be supported by EMIF component?
|
Not yet rated
|
11/28/12 |
Programming PSoC® 3 First Touch Starter Kit CY8CKIT-003 - KBA83430
Question: Do I need to purchase a MiniProg3 to program the PSoC 3 First Touch Starter Kit CY8CKIT-003?
|
Not yet rated
|
11/20/12 |
ADC Performance with External Reference in PSoC® 3 or PSoC 5 – KBA83438
Question: Does an external reference improve the ADC performance?
|
Not yet rated
|
11/19/12 |
Connections on Vcca and Vccd Pins of PSoC® 3 and PSoC 5 - KBA83234
Question: Can the Vccd and Vcca pin on PSoC 3 and PSoC 5 be tied to an external voltage?
|
Not yet rated
|
11/19/12 |
Driving an External Load using VDAC in PSoC® 3 or PSoC 5 - KBA83238
Question: How do I directly drive an external circuit using VDAC in PSoC 3 or PSoC 5?
|
(5/5) by 1
user
|
11/19/12 |
PSoC Creator™ - Keil Compiler Registration - KBA83314
Question: How do I register the Keil compiler that comes with PSoC Creator?
|
(1.5/5) by 4
users
|
10/19/12 |
Interfacing PSoC® 3/PSoC 5 with an Android Device - KBA83909
Question: Can the USB component in PSoC 3 work with an Android Device?
|
Not yet rated
|
10/10/12 |
Workaround to Avoid the Glitch Generated by LVI/HVI Circuits of PSoC® 3 or PSoC 5 After Power Up - KBA83204
Question: PSoC 3 and PSoC 5 TM device Technical Reference Manuals (TRMs), in the section, “Processing a Low/High Voltage Detect Interrupt” specify the glitch conditions. A glitch will be generated after the device is powered up and configured to LVI/HVI circuits to trigger an interrupt instead of device reset. What is the code snippet which can be used to avoid this glitch?
|
Not yet rated
|
10/08/12 |
Best Method of Amplification to get Better Performance from PSoC® 3 OR PSoC 5 Del Sig ADC - KBA81866
Question: What are the different possible methods of amplification available for using with PSoC 3 or PSoC 5 Del Sig ADC? What is the best method of them to get better performance?
|
Not yet rated
|
10/03/12 |
SVF and STAPL Support for PSoC® 3 JTAG Devices - KBA81849
Question:Why am I not able to program PSoC 3 devices using SVF and/or STAPL formats?
|
Not yet rated
|
09/12/12 |
PSoC® 3 Boost Inductor Size - KBA80957
Question: What size inductor should I use for the PSoC 3 boost circuit?
|
Not yet rated
|
07/13/12 |
PSoC Creator hangs while loading on a machine having Kaspersky antivirus
Why is PSoC Creator identified as threat in Kaspersky antivirus?
|
Not yet rated
|
05/13/12 |
Gates in UDB Block of PSoC 3/5
How many gates does the UDB of PSoC 3/5 have?
|
Not yet rated
|
05/07/12 |
Accessing PSoC 3/5 Registers in Firmware
How do I access (Read/Write) the Registers of PSoC 3/5 in firmware?
|
Not yet rated
|
05/07/12 |
Conditions for the Active Current in PSoC 3 data sheet
In the PSoC 3 Datasheet, the Active current is mentioned as 1mA (typical). What are the conditions based on which this Current value is calculated?
|
Not yet rated
|
05/07/12 |
What wireless support is offered in conjunction with the CY8CKIT-001 PSoC1/3/5 DVK?
What wireless support is offered in conjunction with the CY8CKIT-001 PSoC1/3/5 DVK?
|
Not yet rated
|
05/07/12 |
One Shot PWM in PSoC 3/5
Is it possible to create a one shot PWM in PSoC 3/5?
|
Not yet rated
|
05/04/12 |
PSoC 3 and PSoC 5 Application Note Finder
|
Not yet rated
|
04/17/12 |
Hardware Multiplexing Analog Inputs to PSoC5 SAR ADC
How do i multiplex Analog Inputs to SAR ADC in PSoC5 device?
|
Not yet rated
|
03/19/12 |
Diode temperature measurement using CY8CKIT-025
Diode temperature measurement in my CY8CKIT-025 shows the correct temperature only when both the diodes are installed. Why?
|
Not yet rated
|
03/16/12 |
CY8CKIT-030 when used out of box does not show voltage display varying with potentiometer as shown in quick start guide
Question: My CY8CKIT-030 does not show voltage display varying with potentiometer as shown in Quick Start Guide. Why?
|
Not yet rated
|
03/07/12 |
Importance of Coherency register - 16 bit data transfer from ADC to DFB using DMA in PSoC 3/5
What is coherency byte in ADC result register and DFB staging/holding register?
|
Not yet rated
|
03/06/12 |
Registration of Keil Compiler in PSoC Creator
How to register the default Keil compiler in PSoC Creator if normal registration using "Keil License Registration" window fails?
|
Not yet rated
|
02/27/12 |
Using DMA to transfer data to SPIM of PSoC 3/5 on TX_FIFO_NOT_FULL flag
SPI Master + DMA (rising edge trigger) configured to work on TX_FIFO_NOT_FULL flag is transmitting only the first data. Why?
|
Not yet rated
|
02/17/12 |
Difference between count & clock pins of PSoC 3/5 Counter component
What is the difference between count & clock pins of PSoC 3/5 Counter component?
|
Not yet rated
|
02/17/12 |
Navigating to menu items in Creator 1.0 gives the exception.
When I click to menu items in creator the exception appears "System.ArgumentOutOfRangeException: Value '0' is not a valid value for Interval. Interval must be greater than 0."?
|
Not yet rated
|
02/15/12 |
Temp sensor EBK temperature differences
Why are the four sensors showing different temperatures in temp sensor EBK?
|
Not yet rated
|
02/02/12 |
Time Period Measurement
How to i measure time period with PSoC3
|
Not yet rated
|
01/20/12 |
USB Interrupt Transfer
How do i configure PSoC3 USB for Interrupt transfer?
|
Not yet rated
|
01/20/12 |
RTOS Support in PSoC 3
Is there RTOS support for PSoC 3, for example RTX51?
|
Not yet rated
|
11/30/11 |
CY8CKIT-001 Voltage Regulation Error
What should I do if my CY8CKIT-001 DVK does not provide an accurate 3.3V supply?
|
(5/5) by 1
user
|
11/28/11 |
MiniProg3 Rev. *A
Do I have an out of Date Miniprog3 revision *A?
|
(5/5) by 2
users
|
11/28/11 |
Mandatory upgrade required for PSoC® Creator™ 1.0 Service Pack 2
Why do I get an error for upgrading to CY_BOOT v2.21 when I open my project in PSoC Creator 1.0 SP2?
|
Not yet rated
|
11/22/11 |
Building and adding the component in a project
How to build a component once created? How to add a component in the project?
|
Not yet rated
|
09/30/11 |
Basics of Verilog and datapath configuration tool for component creation
Where can Verilog or datapath configuration tool can be used? What are its limitations?
|
Not yet rated
|
09/30/11 |
Modifying a component
What is a schematic macro? How to modify a component?
|
Not yet rated
|
09/30/11 |
Integrating library code as a part of the component
What are possible options for integrating library as a part of the component? How to access APIs and variables from library code?
|
Not yet rated
|
09/30/11 |
When and How to create a component
What are the factors which need to be considered before converting an IP to a component? How to decide which method to follow for designing a component?
|
Not yet rated
|
09/30/11 |