|
Title
|
Customer Rating
|
Updated
|
AN311 - FM25V01 Replaces Two FM25CL64s
Upgrade Your Board with new F-RAM Device
|
Not yet rated
|
04/05/13 |
AN308a - Comparison of FM25L256B, FM25V02, and FM25W256
Applies to 256Kb SPI F-RAM Devices
|
Not yet rated
|
04/05/13 |
AN217 - FM24CL64B as Replacement for FM24CL32
Applies to 3V I2C 32Kb and 64Kb Devices
|
Not yet rated
|
04/05/13 |
AN215 - Differences between the FM24C64 and FM24C64B
Compares 64Kb 5V I2C F-RAM Devices
|
Not yet rated
|
04/05/13 |
AN78920 - PSoC® 1 Temperature Measurement Using Diode
AN78920 explains the diode-based temperature measurement using PSoC® 1 – CY8C28xxx family.
|
(5/5) by 1
user
|
04/04/13 |
AN76458 - PSoC® 5LP High Voltage (120-240 VAC) Powerline Communication Solution
AN76458 describes how to develop a complete powerline communication system with the PSoC 5LP family of devices. Attached to the application note is a code example of a 2400 bps FSK modem with the Cypress powerline network protocol. Also attached are design files of a board that interfaces the PSoC 5LP device to a high voltage (120-240 VAC) powerline.
|
Not yet rated
|
04/04/13 |
AN59389 - Host Sourced Serial Programming for CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L, CY8C20xx7, CY8C20045 and CY8C20055
Host Sourced Serial Programming (HSSP) is a method of in-circuit serial programming (using ISSP protocol) of the CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L, CY8C20xx7, CY8C20045 and CY8C20055 devices from an onboard host processor. AN59389 explains how to use and port the HSSP code example, provided along with this application note, to the desired host processor for programming the CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L, CY8C20xx7, CY8C20045 and CY8C20055 devices.
|
Not yet rated
|
04/04/13 |
AN2397 - CapSense® Data Viewing Tools
AN2397 teaches you how to monitor data from any Cypress CapSense® controller using either the I2C or UART interface. With the tools described in this application note you can view and log real-time sensor data for CapSense tuning and debugging.
|
(5/5) by 1
user
|
04/04/13 |
AN206 - Differences in FM24L256 and FM24V02
Applies to 256Kb I2C F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN216 - Differences between the FM24C256 and FM24W256
Compares 256Kb 5V I2C F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN213 - Differences between the FM24C04A and FM24C04B
Compares 4Kb 5V I2C F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN212 - Differences between the FM24CL64 and FM24CL64B
Compares 64Kb 3V I2C F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN210 - Differences between the FM24CL04 and FM24CL04B
Compares 4Kb 3V I2C F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN207b - FM24V01 Replaces Two FM24CL64s
Upgrade Your Board with new F-RAM Device
|
Not yet rated
|
04/03/13 |
AN114 - FM18W08 Replaces FM18L08
Upgrade Your Board with new F-RAM Device
|
Not yet rated
|
04/03/13 |
AN113 - Differences in FM1608 and FM1608B
Compares 256Kb F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN108 - Differences in FM18L08 and FM28V020
Applies to 256Kb Parallel F-RAM Devices
|
Not yet rated
|
04/03/13 |
AN72845 - Design Guidelines for Cypress Quad Flat No Extended Lead (QFN) Packaged Devices
AN72845 describes guidelines for the design, manufacturing, and handling of Cypress’s quad flat no extended lead (QFN) packages on flexible printed circuits (FPCs) and rigid printed circuit boards.
|
Not yet rated
|
04/03/13 |
AN72382 - Using PSoC® 3 and PSoC 5LP GPIO Pins
AN72382 shows you how to use GPIO pins effectively in PSoC® 3 and PSoC 5LP. Major topics include GPIO basics, configuration, mixed-signal use, registers, interrupts, and low-power behavior.
|
(3.5/5) by 2
users
|
04/02/13 |
AN60081 - Interfacing Samsung MuxOneNand to Cypress USB Controllers
AN60081 explains how to interface Cypress EZ-USB® controller to a Samsung MuxOneNand. It includes a complete API library with source code, helps to integrate MuxOneNand support to any Cypress High Speed USB controller based systems.
|
Not yet rated
|
04/02/13 |
AN60630 - PSoC® 3 – 8051 Code and Memory Optimization
AN60630 shows how to increase the efficiency of 8051 code in PSoC® 3 by making greater use of the 8051 core internal features.
|
(5/5) by 2
users
|
04/02/13 |
AN76530 - PSoC® 1 Automotive Ultrasonic Distance Measurement for Park Assist Systems
AN76530 describes how to use PSoC® 1 devices to build a four-channel ultrasonic distance measurement system for ultrasonic parking assistance (UPA) applications.
|
Not yet rated
|
04/02/13 |
AN66311 - Timing Recommendations for Byte Enables and Chip Enables in MoBL® SRAMs
AN66311 provides timing recommendations for the use of byte enable pins (BHE and BLE) and chip enables (single or dual, as applicable) in select Cypress MoBL® SRAMs with a date code before 2011.
|
(5/5) by 1
user
|
04/01/13 |
AN76348 - Differences in Implementation of EZ-USB® FX2LP™ and EZ-USB FX3 Applications
AN76348 describes the differences between the implementation of applications based on EZ-USB FX2LP™ and EZ-USB FX3™.
|
Not yet rated
|
03/27/13 |
AN75779 - How to Implement an Image Sensor Interface with EZ-USB® FX3™ in a USB Video Class (UVC) Framework
Cypress’s EZ-USB® FX3™ is a USB 3.0 peripheral controller with a general programmable interface, called GPIF™ II, which can connect easily to a range of devices. For example, AN75779 describes how FX3 works with USB video class (UVC) to allow a video-streaming device, such as a webcam, to connect to a USB host to stream video.
|
(4.6/5) by 7
users
|
03/26/13 |
AN61290 - PSoC® 3 and PSoC 5LP Hardware Design Considerations
AN61290 reviews several topics for designing a hardware system around a PSoC® 3 or PSoC 5LP device. Subjects include power system, reset, crystal, and other pin connections, and programming and debugging interfaces. Also included are instructions on how to use PSoC Creator™ to configure the device for the hardware environment.
|
Not yet rated
|
03/26/13 |
AN68272 - PSoC® 3 and PSoC 5LP - Customizing the Bootloader Communication Channel
AN68272 describes how to customize the PSoC 3 and PSoC 5LP bootloader communication channel with UART as an example.
|
(5/5) by 1
user
|
03/26/13 |
AN66477 - PSoC® 3 and PSoC 5LP® - Temperature Measurement with a Thermistor
|
(5/5) by 2
users
|
03/26/13 |
AN54460 - PSoC® 3 and PSoC 5LP Interrupts
AN54460 explains the interrupt architecture in PSoC® 3 and PSoC 5LP and the support for interrupts in the PSoC Creator™ IDE.
|
(4.5/5) by 4
users
|
03/25/13 |
AN73054 - PSoC® 3 and PSoC 5LP Programming Using an External Microcontroller (HSSP)
AN73054 shows how to apply C code to program PSoC® 3 / PSoC 5LP devices using an external microcontroller. This process is referred to as Host Sourced Serial Programming (HSSP), in which the host microcontroller programs PSoC 3 / PSoC 5LP through the serial wire debug (SWD) interface. The C code is written so it can be ported to any microcontroller with minimal changes, greatly reducing the time required to develop HSSP applications for PSoC 3 / PSoC 5LP.
|
Not yet rated
|
03/25/13 |
AN82072 - PSoC® 3 and PSoC 5LP USB General Data Transfer with Standard OS Drivers
AN82072 discusses how to use PSoC 3 and PSoC 5LP devices to transfer generic data across USB using native OS drivers included with Windows, Mac OS, and Linux.
|
Not yet rated
|
03/25/13 |
AN78175 - PSoC® 3 and PSoC 5LP - IEC 60730 Class B Safety Software Library
AN78175 describes the PSoC 3 and PSoC 5LP IEC 60730 Class B Safety Software Library and includes an example project with self-check routines to ensure reliable and safe operation.
|
(5/5) by 1
user
|
03/25/13 |
AN65977 - PSoC® 3 and PSoC 5LP - Creating an Interface to a TMP05/TMP06 Digital Temperature Sensor
AN65977 describes how to configure PSoC 3 applications to interface to an Analog Devices' TMP05 or TMP06 temperature sensor.
|
(5/5) by 11
users
|
03/25/13 |
AN73468 - PSoC® 3 and PSoC 5LP - Single-Cell Lithium-Ion (Li-ion) Battery Charger
AN73468 explains a single-cell Lithium-Ion (Li-ion) battery charger implementation using PSoC 3 or PSoC 5LP. Two types of implementations - linear and switching type are supported. An attached PSoC Creator project, which includes a charge display tool, demonstrates Li-ion battery charging.
|
Not yet rated
|
03/25/13 |
AN60594 - PSoC® 3 and PSoC 5LP: Low Frequency FSK Modulation and Demodulation
AN60594 describes how to create a frequency shift keying (FSK) modulator and demodulator with PSoC® 3 and PSoC 5LP, with digital 0s represented by 2100 Hz, and digital 1s, represented by 1300 Hz.
|
(5/5) by 1
user
|
03/25/13 |
AN77900 - PSoC® 3 and PSoC 5LP Low-power Modes and Power Reduction Techniques
AN77900 is an introduction to the PSoC 3 and PSoC 5LP low-power modes and features. Major topics include PSoC power modes, power management API and registers, additional power-saving techniques, and other low-power mode considerations. The associated PSoC Creator project demonstrates these principles.
|
Not yet rated
|
03/22/13 |
AN43593 - Storage Capacitor (VCAP) Options for Cypress nvSRAM
AN43593 discusses the selection criteria for the storage capacitor (VCAP) options for Cypress nvSRAMs. This document also provides a sample list of a few suitable capacitors as guidance.
|
Not yet rated
|
03/21/13 |
AN14558 - Implementing I/O Bit-Bang SPI Interface with EZ-USB FX2LP™
|
Not yet rated
|
03/19/13 |
AN58764 - Implementing a Virtual COM Port using FX2LP
|
Not yet rated
|
03/19/13 |
AN55663 - Migrating from CY14E256L/STK14C88 to CY14E256LA
|
Not yet rated
|
03/18/13 |
AN1111 - Design and Layout Guidelines for Cypress Clock Generators
AN1111 covers the basic schematic design and printed circuit board (PCB) layout guidelines for Cypress clock generators. General practices for power supply filtering, output terminations, and critical component placements are described in detail. Recommendations for routing clock signals are discussed in brief. Typical examples of schematic and layout are given for reference.
|
Not yet rated
|
03/18/13 |
AN78646 - Integrated Power Manager using PSoC® 1
AN78646 describes the key concepts of power management, including voltage sequencing, fault detection, voltage and current monitoring, real-time trimming, and I2C host communication. The associated example project delivers a fully integrated power management system solution.
|
(5/5) by 1
user
|
03/18/13 |
AN6068 - Replacing 4Mbit (256K x16) MRAM with Cypress nvSRAM
AN6068 discusses the key pinout differences between the Everspin 4Mbit (256K x 16) MRAM and Cypress 4Mbit (256K x 16) nvSRAM devices. These differences should be taken into consideration when designing a PCB to use either MRAM or the high performance nvSRAM on the same footprint as true alternate source part number on the same bill of materials (BOM).
|
Not yet rated
|
03/13/13 |
AN73503 - USB HID Bootloader for PSoC® 3 and PSoC 5LP
A complete USB human-interface device (HID) bootloader solution for PSoC 3 and PSoC 5LP is provided in this Application Note. It describes how to add an USB bootloader to a PSoC 3 or PSoC 5LP project. It also discusses how to create your own bootloader GUI using visual C#. The GUI provided uses the HID interface for communication to perform the whole bootload operation.
|
Not yet rated
|
03/05/13 |
AN84868 - Configuring an FPGA over USB Using Cypress EZ-USB® FX3™
AN84868 shows you how to configure a Xilinx FPGA over a slave serial interface using EZ-USB® FX3™, which is the next-generation USB 3.0 peripheral controller.
|
(5/5) by 1
user
|
02/28/13 |
AN73212 - Debugging with PSoC® 1
AN73212 introduces the elements of the PSoC® 1 debugger system and explains how to configure and use them effectively
|
(5/5) by 4
users
|
02/20/13 |
AN52705 - PSoC® 3 and PSoC 5LP - Getting Started with DMA
AN52705 provides an introduction to direct memory access (DMA) in PSoC® 3 and PSoC 5LP.
|
(5/5) by 2
users
|
02/18/13 |
AN80555 - 72-Mbit RH QDR®II+ Interface Controller Implementation Details
AN80555 application note describes the architecture and timing details of a RHQDR®II+ memory interface controller implementation for Cypress’s Radiation Hardened QDRII+ SRAMs. The accompanying synthesizable reference design targets Xilinx Virtex-5QV family of FPGA devices.
|
Not yet rated
|
02/15/13 |
AN68403 - PSoC® 3 and PSoC 5LP Analog Signal Chain Calibration
AN68403 explains how to calibrate an analog signal chain by using a calibrated delta sigma ADC and an on-chip EEPROM that is available in PSoC® 3 and PSoC 5LP.
|
Not yet rated
|
02/15/13 |
AN58986 - NAND Flash Page Reader for NX2LP Based Mass Storage Devices
AN58986 demonstrates the implementation of a basic utility to read NAND Flash Pages from an NX2LP/NX2LP-Flex based mass storage device.
|
Not yet rated
|
02/15/13 |