Cypress Perform

Home > Products > Touch Sensing

Touch Sensing

Related Documentation Results: Application Notes

Keyword: Language:  
      Click to subscribe to RSS

Results 1 - 29 of 29
Title Customer Rating Updated
AN59389 - Host Sourced Serial Programming for CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L and CY8C20xx7/S Updated
Host Sourced Serial Programming (HSSP) is a method of in-circuit serial programming (using ISSP protocol) of the CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L and CY8C20xx7 devices from an onboard host processor. AN59389 explains how to use and port the HSSP code example, provided along with this application note, to the desired host processor for programming the CY8C20xx6A, CY8C20xx6AS, CY8C20xx6L and CY8C20xx7 devices.

Not yet rated
04/23/15
AN2361 - USB-Powered Battery Charger for NiCd/NiMH Batteries Updated
This application note describes a USB-powered battery charger for NiCd/NiMH batteries that permits rapid recharging. Dedicated PC-based software has been developed to monitor and control the charging process in real time and to display data in a graphical user interface. The charger can be embedded into consumer, office, and industrial applications. It needs no drivers and starts working immediately when plugged into a USB port. A battery can be left in the charger for any length of time without the risk of overcharge.

(4/5) by 1 user
04/23/15
AN2186 - Consumer or Industrial: Acoustic Glass Break Detector
AN2186 describes a low-cost, three-band acoustic glass break detector. Digital signal processing provides high sensitivity and sufficient resistance to false alarms.

Not yet rated
04/06/15
AN78329 - CY8C20xx7/S CapSense® Design Guide
This document provides design guidance for implementing capacitive sensing (CapSense®) functionality with the CY8C20xx7/S family of CapSense controllers.

Not yet rated
04/01/15
CY8CMBR2110 CapSense® Design Guide
This document describes how to implement capacitive sensing functionality using Cypress‘s CapSense® Express CY8CMBR2110 device.

Not yet rated
03/23/15
CY8C20x34 CapSense® Design Guide
This design guide provides design guidance for implementing capacitive touch sensing (CapSense®) functionality with the CY8C20x34 family of CapSense Controllers.

Not yet rated
03/23/15
AN42137 - Capsense™ Express Software Tool
This application note explains how to use the PSoC Designer System Level Design to configure the CapSense Express device. How to tune the parameters for required functionalities is also described. This document expects user to a basic level of familiarity with PSoC Designer System Level Design.

(4.8/5) by 4 users
03/10/15
AN44209 - Capsense® Express™ Power And Sleep Considerations
This application note describes the different power and sleep operation modes supported by CapSense® Express™. It also explores the power consumption of the device in these modes.

(4/5) by 1 user
03/10/15
AN56691 - CapSense® Express™ – Creating Reference Designs with 1CS/2CS Button Devices
CapSense® Express™ family of configurable devices provides a quick way to implement touch sensing functionality. The One- and Two-button devices can easily replace mechanical switches in applications requiring low pin count devices. This application note explains how to create simple reference designs with the CY8C20111/CY8C20121 devices and also demonstrates the functionality of these devices through example projects.

Not yet rated
03/10/15
AN54657 - CapSense® Express™ – 1CS/2CS Button Software Tool Usage
CapSense® Express™ is a family of capacitive sensing devices that helps you do rapid prototyping of touch-sensing interfaces. Use the one-button and two-button low-pin-count devices to replace one or two mechanical switches with touch-sensing buttons. This application note describes how to use PSoC® Designer™ 5.0 to quickly configure and tune CapSense Express devices.

Not yet rated
03/10/15
AN53490 - CapSense® Express™ – Design to Production
The CapSense® Express™ family of touch sensing devices easily integrates into various products. They often replace existing mechanical switches and push buttons with little or no impact on the rest of the design. This application note describes methods and tips on how to smoothly design these devices; it also helps you make a robust design with CapSense Express.

(5/5) by 1 user
03/10/15
AN48303 - CapSense® Express™ – Migrating from Firmware Rev 0x15 to Rev 0x1B
AN48303 discusses the compatibility issues that you should consider before migrating from CapSense® Express™ firmware revision 0x15 to 0x1B.

Not yet rated
03/10/15
AN48755 - Designing with CapSense® Express™ 8-pin SOIC Device
This application note evaluates the capacitive sensing performance of different CapSense® button shapes and sizes in the CY8C20142 8-pin SOIC device. It analyzes the maximum trace length supported by this device without using the CMOD capacitor. The variation in SNR without CMOD and improvement in SNR with CMOD are also described.

Not yet rated
03/10/15
AN48430 - CapSense® Express™ – Noise Filtering Methods
CapSense® noise filtering helps in making capacitive sensing more robust. AN48430 describes the different filtering mechanisms implemented in CapSense Express devices.

Not yet rated
03/10/15
AN44208 - CapSense® Express™ - I2C Communication Timing Analysis
This application note provides the I2C timing requirements for CY8C201xx CapSense® Express™. It includes information on boot up time of the CapSense Express device, time to execute different configuration commands, time to enter sleep and deep sleep modes, and wakeup time.

Not yet rated
03/10/15
AN44207 - CapSense Express™: APIs for Register Configuration
AN44207 defines APIs for register configuration. These APIs are used to write to CapSense Express™ registers through the host microcontroller when the CapSense Express slave device is on board.

Not yet rated
03/10/15
AN72362 - Reducing Radiated Emissions in Automotive CapSense® Applications
AN72362 describes various hardware and firmware techniques that reduce radiated electromagnetic emissions in order to pass automotive and general electromagnetic compatibility (EMC) tests for capacitive touch based applications.

Not yet rated
02/26/15
CY8CMBR2016 CapSense® Design Guide
This document describes how to implement capacitive sensing functionality using Cypress‘s CapSense® Express™ CY8CMBR2016 device.

(2/5) by 1 user
02/09/15
AN64846 - Getting Started with CapSense®
This guide is an ideal starting point for those new to capacitive touch sensing (CapSense®) as well as for learning key design considerations and layout best practices to ensure design success.

(4.3/5) by 7 users
01/27/15
AN65973 - CY8C20xx6A/H/AS CapSense® Design Guide
This design guide provides design guidance for using the capacitive sensing (CapSense®) functionality with the CY8C20xx6A/AS/H family of CapSense controllers.

Not yet rated
01/27/15
AN85951 - PSoC® 4 CapSense® Design Guide
The PSoC® 4 CapSense® Design Guide shows how to design capacitive touch sensing applications with the PSoC 4 and PRoC BLE families of devices

Not yet rated
01/23/15
CY8C21x34/B CapSense® Design Guide
This document gives design guidance for using capacitive touch sensing (CapSense®) functionality with the CY8C21x34/B family of CapSense Plus™ Controllers.

(5/5) by 1 user
01/20/15
CY8CMBR2010 CapSense® Design Guide
This document describes how to implement capacitive sensing functionality using Cypress‘s CapSense® Express CY8CMBR2010 device.

Not yet rated
01/19/15
CY8CMBR2044 CapSense® Design Guide
This document provides design guidance for building CapSense applications with the Cypress’s hardware configurable CY8CMBR2044 CapSense® Express™ device.

(5/5) by 1 user
01/19/15
PSoC® 3 and PSoC® 5LP CapSense® Design Guide
This document provides design guidance for building CapSense applications with the PSoC 3 and PSoC 5LP family of devices.

Not yet rated
01/19/15
CY8CMBR3xxx CapSense® Design Guide
This guide (CY8CMBR3xxx CapSense® Design Guide) shows how to design capacitive touch-sensing applications with the CY8CMBR3xxx CapSense controller family. The CY8CMBR3xxx CapSense controller family offers unprecedented signal-to-noise ratio, best-in-class liquid tolerance, and a wide variety of sensors such as buttons, sliders, and proximity sensors. This guide explains the CY8CMBR3xxx CapSense design flow, design tools, design considerations, and performance tuning.

(3.5/5) by 2 users
01/19/15
AN2397 - CapSense® Data Viewing Tools
AN2397 shows how to monitor data from any Cypress CapSense® controller using the I2C or UART interface. With the tools described in this application note, you can view and log real-time sensor data for CapSense tuning and debugging.

Not yet rated
12/17/14
AN49079 - CapSense Plus™: Dynamically Configuring CapSense®
Dynamic reconfiguration is one of the powerful features available in PSoC®. This application note explains how to create a CapSense Plus™ application with dynamic reconfiguration.

(5/5) by 2 users
12/03/14
AN92239 - Proximity Sensing with CapSense®
This application note shows how to implement a robust, low-power, low-cost, CapSense-based proximity sensing system.

Not yet rated
11/04/14
Results 1 - 29 of 29
Sunset Owner: CFB; Secondary Owner: YMT;