|
Title
|
Customer Rating
|
Updated
|
AN65209 - Getting Started with FX2LP™
Updated
AN65209 introduces you to the EZ-USB® FX2LP™ USB 2.0 device controller.
|
Not yet rated
|
05/07/13 |
AN61345 - Designing with EZ-USB FX2LP™ Slave FIFO Interface using FPGA
Updated
AN61345 provides a sample project to interface an FX2LP™ with FPGA using Slave FIFO interface. The interface, described in the sample implementation, adds High-Speed USB connectivity to applications such as data acquisition, industrial control and monitoring, and image processing. The project provided with this application note is implemented and tested with Xilinx Spartan 6 FPGA.
|
(4.3/5) by 9
users
|
05/07/13 |
AN4067 - Endpoint FIFO Architecture of EZ-USB FX1/FX2LP™
|
(4.3/5) by 4
users
|
05/02/13 |
AN60081 - Interfacing Samsung MuxOneNand to Cypress USB Controllers
AN60081 explains how to interface Cypress EZ-USB® controller to a Samsung MuxOneNand. It includes a complete API library with source code, helps to integrate MuxOneNand support to any Cypress High Speed USB controller based systems.
|
Not yet rated
|
04/02/13 |
AN76348 - Differences in Implementation of EZ-USB® FX2LP™ and EZ-USB FX3 Applications
AN76348 describes the differences between the implementation of applications based on EZ-USB FX2LP™ and EZ-USB FX3™.
|
Not yet rated
|
03/27/13 |
AN14558 - Implementing I/O Bit-Bang SPI Interface with EZ-USB FX2LP™
|
Not yet rated
|
03/19/13 |
AN58764 - Implementing a Virtual COM Port using FX2LP
|
Not yet rated
|
03/19/13 |
AN58986 - NAND Flash Page Reader for NX2LP Based Mass Storage Devices
AN58986 demonstrates the implementation of a basic utility to read NAND Flash Pages from an NX2LP/NX2LP-Flex based mass storage device.
|
Not yet rated
|
02/15/13 |
AN78446 - Interrupt Handling in EZ-USB® FX2LP™
This application note explains the handling of three USB specific interrupts and external interrupts in EZ - USB® FX2LP™. Sample code for each interrupt is also available with this AN.
|
Not yet rated
|
02/08/13 |
Code/Memory Banking Using EZ-USB® - AN58170
|
(4.5/5) by 2
users
|
01/17/13 |
Implementing an 8-Bit Parallel MPEG2-TS Interface Using Slave FIFO Mode in FX2LP - AN58069
This application note explains how to implement an 8-bit parallel MPEG2-TS interface using the Slave FIFO mode.
|
(5/5) by 1
user
|
01/10/13 |
AN50963 - EZ-USB® FX1™/FX2LP™ Boot Options
AN50963 describes the details of the different boot options supported in Cypress’s EZ-USB® FX1™/FX2LP™ USB 2.0 peripheral controllers.
|
(3.8/5) by 4
users
|
12/27/12 |
AN58009 - Serial (UART) Port Debugging of FX1/FX2LP Firmware
|
Not yet rated
|
12/26/12 |
AN70983 - EZ-USB FX2LP™ Bulk Transfer Application in C# Using SuiteUSB C# Library (CyUSB.dll)
AN70983 demonstrates how to build an application on Visual C# to send bulk data out and receive it back over a bulk endpoint of FX2LP, which is developed using Cypress SuiteUSB C# library (CyUSB.dll) for creating Windows applications using Microsoft Visual Studio. This document also explains associated firmware used in FX2LP to implement loopback transfers on bulk endpoints, and the application is tested with FX2LP Development kit.
|
Not yet rated
|
12/19/12 |
AN70486 - EZ-USB® FX2LP™ Host Application in VC++ 2008 Using Suite USB Library (CyUSB.dll)
Cypress’s FX2LP is one of the most popular programmable high-speed USB controllers in the industry. Cypress provides SuiteUSB for creating windows applications using Microsoft Visual Studio. This application note demonstrates how to build a host application on Microsoft Visual C++ platform, using the Cypress SuiteUSB C# library, CyUSB.dll, to perform USB BULK IN and OUT transfers with FX2LP and the associated project is tested with FX2LP Development kit.
|
Not yet rated
|
12/19/12 |
Interfacing SRAM with FX2LP over GPIF - AN57322
This application note discusses how to connect Cypress SRAM CY7C1399B to FX2LP over the General Programmable Interface (GPIF).
|
(4/5) by 2
users
|
11/28/12 |
AN74505 - EZ-USB® FX2LP™ - Developing USB Application on MAC OS X using LIBUSB
AN74505 describes how libusb-1.0 can be used to develop USB host application (Cocoa Application) on MAC OS X 10.6/10.7 for Cypress EZ-USB® FX2LP™ products. This includes step-by-step procedure for developing a host application to communicate with FX2LP products. Here, a bulkloop host application is demonstrated using a bulkloop firmware.
|
Not yet rated
|
11/05/12 |
AN66806 - Getting Started with EZ-USB® FX2LP™ GPIF
The GPIF is a programmable parallel interface that provides a glue-less interface between the EZ-USB® FX2LP™ and an external peripheral.
|
(4.7/5) by 3
users
|
10/16/12 |
AN73609 - EZ-USB® FX2LP™/ FX3™ Developing Bulk-Loop Example on Linux
AN73609 describes how libusb can be used to develop an USB host application on a Linux-based OS for Cypress EZ-USB® FX2LP™/ FX3™ products. It includes a step-by-step procedure for developing the bulk-loop example.
|
Not yet rated
|
10/15/12 |
Guide to Boot EZ-USB from External Parallel Memory - AN55037
|
Not yet rated
|
10/05/12 |
AN4078 - Migrating From EZ-USB® FX2™ to EZ-USB FX2LP™
AN4078_C provides details on how to migrate an EZ-USB FX2 based design to EZ-USB FX2LP based design. It highlights the differences between the EZ-USB FX2LP™ and EZ-USB FX2™. It also provides a brief description of the whole product support collateral available for development work with FX2LP.
|
(5/5) by 1
user
|
09/11/12 |
AN45197 - Using the Hex2bix Conversion Utility
|
(5/5) by 1
user
|
08/28/12 |
AN63787 - EZ-USB® FX2LP™ GPIF and Slave FIFO Configuration Examples Using 8-bit Asynchronous Interface
AN63787 discusses how to configure the general programmable interface (GPIF) and slave FIFOs of EZ-USB FX2LP™ in both manual mode and auto mode, to implement an 8-bit asynchronous parallel interface. This Application Note is tested with two FX2LP development kits connected in back-to-back setup; the first one acting in master mode and the second in slave mode.
|
Not yet rated
|
08/28/12 |
EZ-USB® FX2LPTM/FX2LP18 56-Ball BGA PCB Layout Guidelines
|
Not yet rated
|
08/22/12 |
AN46860 - Schematic Review Checklist for West Bridge® Astoria™
|
Not yet rated
|
08/14/12 |
AN023 - USB Compliance Testing Overview
This application note discusses USB Compliance Testing.
|
(5/5) by 1
user
|
08/10/12 |
AN15456 - Guide to Successful EZ-USB(R) FX2LP(TM) and EZ-USB FX1(TM) Hardware Design and Debug
|
(4/5) by 2
users
|
08/10/12 |
Troubleshooting USB 2.0 Signal Quality - AN13632
|
Not yet rated
|
08/10/12 |
Mac OS X: Getting Started with USB - AN1105
|
(5/5) by 3
users
|
08/10/12 |
AN64408 - Getting Started with NX2LP-Flex(TM)
|
Not yet rated
|
08/08/12 |
Configuring a Xilinx Spartan-3E FPGA Over USB Using EZ-USB FX2LP™ - AN63620
|
(3.5/5) by 4
users
|
07/24/12 |
AN4053 - Streaming Data Through Isochronous or Bulk Endpoints on EZ-USB® FX2™ and EZ-USB FX2LP™
Discusses streaming data via isochronous/bulk endpoints using the CY7C68013 EZ-USB FX2.
|
(5/5) by 1
user
|
07/24/12 |
AN6077 - Implementing an 8-Bit Asynchronous Interface with FX2LP™
|
(3/5) by 2
users
|
07/24/12 |
Firmware Optimization in EZ-USB® - AN61244
|
(5/5) by 2
users
|
07/24/12 |
Setting Up, Using, and Troubleshooting the Keil(TM) Debugger Environment - AN42499
|
(5/5) by 1
user
|
07/24/12 |
AN5078 - EZ-USB Hardware - Design considerations for EEPROM usage
|
Not yet rated
|
07/24/12 |
AN1193 - Using Timer Interrupt in Cypress EZ-USB® FX2LP™ Based Applications
This application note is aimed at helping EZ-USB® FX2LP™ based firmware developers use timer interrupts in their applications, by providing a framework based timer interrupt program written in C.
|
Not yet rated
|
07/23/12 |
AN1168 - High-speed USB PCB Layout Recommendations
|
(5/5) by 1
user
|
07/23/12 |
Monitoring the EZ-USB FX2LP(TM) VBUS - AN15813
|
Not yet rated
|
07/23/12 |
SPI Implementation Using Serial Mode-0 of EZ-USB FX2LP™ - AN67442
|
Not yet rated
|
07/23/12 |
EZ-USB FX2LP™/AT2LP™ Reset and Power Considerations - AN064
Many designers have had difficulty with the reset and power needs of the FX2LP and the USB specification. This Application Note addresses the main areas where USB and FX2LP designs have special needs.
|
Not yet rated
|
07/18/12 |
Using A Resonator For USB - AN6070
Most of the parts covered by this application note are high-speed USB device interface integrated circuits, the one exception is the CY7C64713/14 parts.
|
Not yet rated
|
07/18/12 |
AN4051 - FX2LP GPIF Flow State Feature for UDMA
|
Not yet rated
|
07/18/12 |
AN52970 - Windows Hardware Quality Labs (WHQL) Signing Procedure for Customer Modified Cypress USB Driver Files
|
(4.6/5) by 5
users
|
07/10/12 |
Vendor Command Design Guide for the FX2LP - AN45471
|
(4/5) by 1
user
|
05/29/12 |
AN5070 - Migrating from ISD-300LP™ to CY7C68300C
|
Not yet rated
|
09/05/11 |
AN5071 - EZ-USB™ AT2LP Features
EZ-USB™ AT2LP Features
|
Not yet rated
|
08/25/11 |
AN6076 - Differences Between EZ-USB FX2LP(TM) and MoBL-USB(TM) FX2LP18
|
(4/5) by 1
user
|
08/17/11 |
AN15652 - Interfacing a Cypress MoBL-USB(TM) FX2LP18 with an Intel PXA27x Processor
|
Not yet rated
|
06/22/11 |
AN14705 - EZ-USB® AT2LP™ Hardware Design Review Guide
|
Not yet rated
|
06/17/11 |