|
Title
|
Customer Rating
|
Updated
|
Programming the EZ-Host Development Board - KBA84123
Question: How do I build and download code to the EZ-Host Development Board?
|
Not yet rated
|
04/08/13 |
Windows Hardware Certification Process for Customer Modified Cypress USB Driver Files
Windows Hardware Certification Process for Customer Modified Cypress USB Driver Files
|
Not yet rated
|
07/10/12 |
Delay between sending LCP commands for OTG-HOST
OTG-Host BIOS Users manual stating that the host must grant the BIOS 30 uS between sending LCP commands. Does this only apply when using the HSS interface to communicate with the controller, or does it apply regardless of the interface?
|
Not yet rated
|
01/02/12 |
Difference between SL811HS and CY7C67300/CY7C67200
What is the functional difference between SL811HS and CY7C67300/CY7C67200?
|
(5/5) by 1
user
|
01/02/12 |
Code execution in the OTGHOST
How can one check if the code is being executed in the OTGHOST?
|
Not yet rated
|
01/02/12 |
Device Mode Unplug Detection in CY7C67300
The sie1_slave_reset_isr is expected to be called on a device detach but it is called on an attach. What is the recommended method of detecting a detach?
|
Not yet rated
|
12/28/11 |
Theoretical Transfer Rate (speed) of EZ-Host
What is the theoretical transfer rate (speed) of the ez-host ?
|
Not yet rated
|
12/28/11 |
What is the difference between the SL11 and the SL11T?
What is the difference between the SL11 and the SL11T?
|
Not yet rated
|
11/15/11 |
In the SL11H (slave mode) and SL11, does the "Send Stall" bit (bit 5) of the Endpoint Control Register(s) need to be reset for every transaction? Or is it a sticky bit?
In the SL11H (slave mode) and SL11, does the "Send Stall" bit (bit 5) of the Endpoint Control Register(s) need to be reset for every transaction? Or is it a sticky bit?
|
Not yet rated
|
10/02/11 |
Why can't I get any slave devices to respond to the SL11H's requests (as a host)?
Why can't I get any slave devices to respond to the SL11H's requests (as a host)?
|
Not yet rated
|
10/02/11 |
SL11H (slave mode) or SL11 ignoring packets/requests
Why is the SL11H (slave mode) or SL11 ignoring packets/requests? Time-outs occur instead of responding with a handshake or data.
|
Not yet rated
|
10/02/11 |
Read content error when reading back the register address written to SL11H/SL11 with an external processor
When I read data from the SL11H/SL11 with an external processor, I always read back the register address I just wrote. What can be the issue?
|
Not yet rated
|
10/02/11 |
Address lines driven low for the CY7C67200 in sleep mode
For the CY7C67200, when in sleep mode, the datasheet says that the address lines are driven low. Why are these inputs driven low?
|
Not yet rated
|
10/02/11 |
Slave mode of the SL811HS on endpoint 1
Does SL811HS work in slave mode on endpoint 1?
|
Not yet rated
|
10/02/11 |
Deploying SL811HS in an Operating System less environment
Is it possible to interface SL811HS with an Operating System less environment to transfer data to a printer?
|
Not yet rated
|
10/02/11 |
Writing to Host n SOF/EOP Count Registers when using a hub
When I connect a second device (also full speed) to port 2 (same SIE). When this port comes out of reset it affects the timing of the SOF packets being sent. Is there a fix for this?
When I have a Hub on on port of an SIE and connect a device on the second port of the same SIE the hub stops working. what can be the issue?
|
Not yet rated
|
10/02/11 |
IDE bus sharing with CY7C67300 (EZ-Host)
Can we tri-state the IDE interfaces on CY7C67300 so our other device can all share the IDE Bus?
|
Not yet rated
|
10/02/11 |
Development with EZ-Host/OTG, getting started.
How complicated is development for the EZ-Host/OTG? How to get started using EZ-Host or EZ-OTG?
|
Not yet rated
|
10/02/11 |
EZ-Host GPIO
What is the relationship between the data_out register, data_in register and data_direction register in relation to the GPIO posts of the EZ-OTG/EZ-Host chip?
|
Not yet rated
|
10/02/11 |
OTG-Host Class Driver for PDA
Can you provide a "class driver" for a PDA? Do you have a class driver for a PocketPC?
|
Not yet rated
|
10/02/11 |
Eclipse Crashes
can start Eclipse and build an example project, but Eclipse crashes when I try to open any of the project files. The error is :
JVM terminated. Exit code=1
C:\WINNT\system32\javaw.exe
-cp C:\Cypress\USB\OTG-Host\Tools\aclipse\startup.jar
org.eclipse.launcher.Main
-os win32
-ws win32
-arch x86
-showsplash C:\Cypress\USB\OTG-Host\Tools\eclipse.exe
-showsplash 600
|
Not yet rated
|
10/02/11 |
Do you have any bench mark results for the CY3663?
Do you have any benchmark results for the CY3663?
How fast can the CY3663 DVK transfer data?
|
Not yet rated
|
10/02/11 |
In the CY3663 development kit, what is the purpose of the StrongArm SBC and how can I use it for my desired development ?
In the CY3663 development kit, what is the purpose of the StrongArm SBC and how can I use it for my desired development ?
Can I purchase just a mezzanine board from the CY3663?
|
Not yet rated
|
10/02/11 |
Enabling of USB device Insert/Remove interrupt to the Host Port Interface (HPI)
How do I get a Insert/Remove event to send an interrupt to the HPI interface when operating in co-processor mode?
|
(4/5) by 2
users
|
10/02/11 |
susb1.s file
Where can I find the susb1.s file or an updated framework mentioned in the Rev.C of Errata Document for CY7C67300 at points 10 and 11?
|
Not yet rated
|
10/02/11 |
EZ HOST configuration using LPI commands over HPI
Is it possible to configure the EZ HOST using LPI commands over HPI? Do I really need the development system in order to do this?
|
Not yet rated
|
10/02/11 |
The difference between hardware interrupts and software interrupts
Is there a difference between the way hardware interrupts and software interrupts are processed?
|
Not yet rated
|
10/02/11 |
The primary differences between the EZ-Host (CY7C67300) and EZ-OTG (CY7C67200)
What are the primary differences between EZ-Host (CY7C67300) and EZ-OTG (CY7C67200)?
|
Not yet rated
|
10/02/11 |
Using Synchronization Type or Usage Type in the bmAttributes of an ISOCHRONOUS endpoint.
|
Not yet rated
|
10/02/11 |
Can I download a stand-alone firmware image over the co-processor interface?
Can I download a stand-alone firmware image over the co-processor interface?
|
Not yet rated
|
10/02/11 |
How can the SIEs on the CY7C67300 be configured?
How can the SIEs on the CY7C67300 be configured?
|
Not yet rated
|
10/02/11 |
How can the SIEs on the CY7C67200 be configured?
How can the SIEs on the CY7C67200 be configured?
|
Not yet rated
|
10/02/11 |
What does the UD bit in the GPIO control register actually do?
What does the UD bit in the GPIO control register actually do?
What does the circuit look like for the ESD protection circuit?
|
Not yet rated
|
10/02/11 |
Standalone mode of ez-host to co processor(HPI) mode
Is it possible to change the standalone mode of ez-host to co processor(HPI) mode without rebooting the board?
|
Not yet rated
|
10/02/11 |
Software USB Stack Implementation For EZ-Host/OTG
Where can I get an example for software USB stack implementation for EZ-Host/OTG?
|
Not yet rated
|
10/02/11 |
Hybrid Mode for EZ-Host
Other than co-processor and stand-alone mode, is there a mode in which the enumeration can be handled by EZ-Host and still have the external master communicate to it ?
|
Not yet rated
|
10/02/11 |
BIOS Reinitialization Without Hardware Reset
While operating in co-processor mode, how can the CY7C67200 BIOS be reinitialized without a hardware reset?
|
Not yet rated
|
10/02/11 |
Switching from HSS Block to Byte Mode
In EZ-Host/OTG, how can we stop the HSS block receive transfer before all the bytes are read and correctly switch HSS from block to byte mode?
|
Not yet rated
|
10/02/11 |
Eclipse IDE Problems with CY3663 Development Kit.
Using the Sun JRE, I can get eclipse to start, but after loading an example, it crashes. What can be the reason?
|
Not yet rated
|
10/02/11 |
Getting msc_scan.bin file from MSC (mass storage class) project in EZ-Host
How to get msc_scan.bin for the example project in the folder path C:\Cypress\USB\OTG-Host\Source\stand-alone\msc?
|
Not yet rated
|
10/02/11 |
The value of EZ-Host CY7C67300 Hardware Revision Register
What is the value of EZ-Host CY7C67300 Hardware Revision Register (address 0xC004)?
|
Not yet rated
|
10/02/11 |
Signature SCAN support in EZ-HOST or EZ-OTG
How BIOS utilizes signature SCAN support in EZ-HOST and what SCAN opcodes are used during firmware download?
|
Not yet rated
|
10/02/11 |
BIOS and Firmware For EZ-Host Chip
Will the Frame work and BIOS code always be there on Ez-Host chip or do we need to load them seperately?
|
Not yet rated
|
10/02/11 |
Perfomance of Mass Storage Host Ref. Design (CY4640)
What performance should be expected from the EZ-Host chip when running the Mass Storage Host Ref. Design (CY4640) in standalone mode?
|
Not yet rated
|
10/02/11 |
Features of CY3663 EZ-HOST interfaces in DVK board
What are the features of CY3663 EZ-HOST interfaces in DVK board?
|
Not yet rated
|
10/02/11 |
Voltage and Current Rating of CY4640 Development Kit
What is the voltage and current rating of the CY4640 board? Is there a suitable source for it?
|
Not yet rated
|
10/02/11 |
Choice of different Interfaces Used in Co-Processor mode of CY7C67300
Based on throughput, which interface is the popular choice?
|
Not yet rated
|
10/02/11 |
How does the CyUSB.dll recognize a cypress device?
How does the CyUSB.dll recognize the cypress device pluged in? Does it use the PID/VID , GUID or other entry property?
|
Not yet rated
|
10/02/11 |
Methods to download firmware to EZ_HOST/EZ_OTG in standalone mode
What are the different methods of downloading firmware to EZ_HOST/EZ_OTG memory in a standalone mode?
|
Not yet rated
|
10/02/11 |
Difference between SL811HS and CY7C67200/300
What is the difference between the SL811HS and the CY7C67300?
|
Not yet rated
|
10/02/11 |