|
Title
|
Customer Rating
|
Updated
|
Recommended Kelvin Connection for Current Sensing in PowerPSoC - KBA83444
Question: What is the correct way to connect Kelvin sense lines for accurate current sensing in PowerPSoC?
|
Not yet rated
|
01/03/13 |
Cypress Survey Dialog Box
A mysterious survey dialog box keeps popping up on my machine? What is this?
|
Not yet rated
|
06/04/12 |
Cypress Parts Baking Condition Information
Do Cypress parts require baking? If so, what are the conditions?
|
Not yet rated
|
05/24/12 |
Country of Origin (COO) Information
Where can I find the Country of Origin (COO) of a Cypress product?
|
Not yet rated
|
05/24/12 |
Recommended Reflow for Cypress Parts Information
What is Cypress’s Parts Recommended Reflow?
|
Not yet rated
|
04/20/12 |
Cypress' Parts Shelf Life Condition Information
What is Cypress’s Parts Shelf Life condition?
|
Not yet rated
|
04/19/12 |
PowerPSoC® – Improving IMO Frequency Accuracy over a Wide Temperature Range
What is the accuracy of PowerPSoC Internal Main Oscillator and how to minimize its variation with temperature drift ?
|
Not yet rated
|
03/01/12 |
Using CapSense® Buttons for LED Control on the CY3267 PowerPSoC® Evaluation Kit
How to use the CapSense button for LED control on the CY3267 PowerPSoC® Evaluation Kit?
|
Not yet rated
|
02/16/12 |
PowerPSoC® – Measuring Channel Current Using the Analog Input Multiplexer (AINX)
How to measure channel current using the Analog Input Multiplexer (AINX)?
|
Not yet rated
|
02/16/12 |
Saturation current rating of Inductor used to set-up the built-in switching regulator
Why is the saturation current rating of Inductor used to set-up the built-in switching regulator for PowerPSoC devices equal 1.5A?
|
Not yet rated
|
01/02/12 |
Affect of traces connecting the current sense resistors on current measurement accuracy
Do the traces connecting the current sense resistors affect current measurement accuracy?
|
Not yet rated
|
12/05/11 |
DALI Interface Board
Is the DALI interface board mentioned in AN52525-Implementing a DALI Receiver System Using PowerPSoC available for purchase as a kit?
|
Not yet rated
|
12/05/11 |
Debugging Pods for the EZ Color and Power PSoC Devices
What are the pods to be used for debugging EZ-Color and PowerPSoC devices?
|
Not yet rated
|
12/05/11 |
DALI User Module
The PowerPSoC datasheet talks about the DALI interface in the Digital system section . Is this user module available ?
|
Not yet rated
|
12/05/11 |
Demo Firmware for CY3269N kit
Where I will get the demo firmware for CY3269N?
|
(1/5) by 1
user
|
12/05/11 |
ColorLock Monitor Application of CY3263-ColorLock Evaluation board
Where I will get ColorLock Monitor application of CY3263-ColorLock Evaluation board?
|
Not yet rated
|
12/05/11 |
Minimum On/Off timers in the Hysteretic Controller
What is the importance of minimum on/off timers in the Hysteretic Controller block?
|
Not yet rated
|
12/05/11 |
Rise time for High Voltage input power rail to the Built-in Switching Regulator
What is the min/max rise time for High Voltage input power rail to the Built-in Switching Regulator?
|
Not yet rated
|
12/05/11 |
Built-in Switching Regulator of the CY8CLED0xD/G0x
Am I required to use the Built-in Switching Regulator of the CY8CLED0xD/G0x?
If I am using the Built-in Switching Regulator, do I still connect the Vdd and AVdd?
What are the component values used for the Built-in Switching Regulator?
|
Not yet rated
|
12/05/11 |
PowerPSoC Maximum Burn-In Temperature
What is the maximum burn-in temperature for the board once the PowerPSoC device is assembled on it?
|
Not yet rated
|
12/05/11 |
Selecting a current sense resistor for the PowerPSoC
How do I select a current sense resistor for the PowerPSoC?
|
Not yet rated
|
12/05/11 |
Using PowerPSoC with input voltage greater than 32V
Can the PowerPSoC be used with input voltage greater than 32V?
|
Not yet rated
|
12/05/11 |
The PowerPSoC SREG specifies a 10uF X7R grade ceramic capacitor with a minimum ESR of 0.1 ohm for C1
Why does the PowerPSoC SREG specify a 10uF X7R grade ceramic capacitor with a minimum ESR of 0.1 ohm for C1?
|
Not yet rated
|
12/05/11 |
Selecting a ripple current when DC current is required through the LED string
Why do I need to select a ripple current when I want DC current through the LED string?
|
Not yet rated
|
12/05/11 |
Maximum ramp time allowed for voltage on input rail
What is the maximum ramp time allowed for voltage on input rail?
|
Not yet rated
|
12/05/11 |
Built-in Switching Regulator of the CY8CLED0xD/G0x
Am I required to use the Built-in Switching Regulator of the CY8CLED0xD/G0x?
|
Not yet rated
|
12/05/11 |
Kelvin connections for Sense resistor
Why use Kelvin connections for Sense resistor?
|
Not yet rated
|
12/05/11 |
Error while programming CY8CLED08
When trying to program the CY8CLED08-28PVXI with PSoC programmer 3.11, the following error is thrown:
Error shown: “PSoC Device (08 0B 22 10) is not in the Database”
What is the workaround?
|
Not yet rated
|
12/05/11 |
Connecting the GDVdd, Vdd, and AVdd when using the Built-in Switching Regulator
If I am using the Built-in Switching Regulator, do I still connect the GDVdd, Vdd, and AVdd?
|
Not yet rated
|
12/05/11 |
Component values used for the Built-in Switching Regulator
What is the component values used for the Built-in Switching Regulator?
|
Not yet rated
|
12/05/11 |
Calculating upper and lower DAC references for a hysteretic controller of PowerPSoC device
How can one calculate upper and lower DAC references for a hysteretic controller of PowerPSoC device?
|
Not yet rated
|
12/05/11 |
Information needed to implement binning compensation for LED
What data do I need from LED vendors for implementing binning compensation?
|
Not yet rated
|
12/05/11 |
CY3261 firmware and RGB software
Where is the CY3261 kit documentation available ?
|
(5/5) by 1
user
|
12/05/11 |
Dynamically changing the CSA input multiplexed to the AINX
Is it possible to dynamically change the CSA input that is multiplexed to the AINX (Analog Input Multiplexer)?
|
(5/5) by 1
user
|
12/05/11 |
Common Anode configuration with PowerPSoC
Is a common anode LED configuration possible with PowerPSoC?
|
Not yet rated
|
12/05/11 |
GPIO pins available in CY3267 board.
On the CY3267 development kit, is there any GPIO pin brought out that is capable of Analog I/O?
|
Not yet rated
|
12/05/11 |
FN0 pins as GPIO pins.
Can the FN0 pins be used as GPIO pins?
|
Not yet rated
|
12/05/11 |
Internal and External FET control.
Is it possible to control both the external and internal FET simultaneously with the same Hysteretic controllers?
|
Not yet rated
|
12/05/11 |
The role of CY8C24894 in the CY3267 board.
What are the functions implemented by the CY8C24894 on the CY3267 board?
|
Not yet rated
|
12/05/11 |
Counter And Compartor for More Than One PrISM Block
If more than one PrISM user module is instantiated for intensity control, do they share a global counter and comparator?
|
Not yet rated
|
12/05/11 |
Measurement of Current values from CSA block in PowerPSoC
How do I measure the current strength values from the CSA blocks used in regulators inside PPSoC?
|
(4/5) by 2
users
|
12/05/11 |
Driving external FETs using the FN0 pins.
Is it possible to control the SW FETs directly from one of the FN pins of CY8CLED04D01?
|
Not yet rated
|
12/05/11 |
CY3267 Kit documentation
Where will I get the documentation for CY3267 kit?
|
Not yet rated
|
12/05/11 |
CY3268 Kit documentation
Where will I get the documentation for CY3268 kit?
|
Not yet rated
|
12/05/11 |
SWX pin connection when internal FETs are not being used
How should unused internal FET pins (SW0-SW3, pins 40, 37, 36, 33, respectively) be connected?
|
Not yet rated
|
12/05/11 |
Grounded current sensing using PowerPSoC
Is it possible to implement grounded (Low-Side) current sensing using PowerPSoC?
|
Not yet rated
|
12/05/11 |
Start up guidelines for PowerPSoC based system
What are the steps to bring-up a newly fabricated PowerPSoC based system?
|
Not yet rated
|
12/05/11 |
SSDM_Polarity in System Level project
How to invert the "SSDM_Polarity" in System Level project of PSoC Designer 5.0?
|
Not yet rated
|
12/05/11 |
Moisture Sensitivity Level (MSL) of Cypress Parts
How do I find Moisture Sensitivity Level (MSL) of Cypress parts?
|
Not yet rated
|
09/08/11 |
CY3267, CY3268 OCD and EEPROM issues
The below two issues are encountered with the CY3267/CY3268:
1.While trying to connect to the debugger , the error message “Attached pod (00bf0022) is not compatible with the selected PSoC” is thrown.
2.While writing to the EEPROM using the E2PROM module, the API 'E2PROM_bE2Write' returns a value of ‘-1’ indicating write failure.
Why is this so and what is the solution?
|
Not yet rated
|
06/17/11 |