Cypress Perform

Home > Products > Interface > PHYs

PHYs

Related Documentation Results: Application Notes
Keyword: Application: Language:  
      Click to subscribe to RSS

Results 1 - 26 of 26
Title Customer Rating Updated
AN1161 - HOTLink® Jitter Characteristics

Not yet rated 		11/09/11
AN1184 - Frequently Asked Questions about HOTLink®

Not yet rated 		11/02/11
AN1057 - TAXITM to Cypress CY7C9689A HOTLink® Transceiver Conversion Series: 1. System Parallel Interface
AN1057 discusses about the system parallel interface built with the CY7C9689A that are directly compatible with the legacy systems made using AMD TAXI™.
Not yet rated 		11/02/11
AN1032 - Using Decoupling Capacitors
AN1032 provides recommendations on the use of decoupling capacitors for the HOTLink family of data
Not yet rated 		10/21/11
AN1162 - HOTLink® Design Considerations

Not yet rated 		10/20/11
AN1055 - Termination and Biasing of HOTLink IITM High-Speed Serial I/O
AN1055 discusses high speed circuit termination techniques and the required DC-biasing for the serial drivers and receivers used in the HOTLink II™ device.
Not yet rated 		10/19/11
AN35159 - TAXI™ to Cypress CY7C9689 HOTLink® Transceiver Conversion Series: 2 Serial Interface

Not yet rated 		10/12/11
AN1130 - Interfacing the CY7B923 and CY7B933 (HOTLink®) to Clocked FIFOs
This application note considers the interface issues between the Cypress CY7B923/933(HOTLink)transmitter/receiver and Cypress Clocked FIFOs.This note is divided into two sections:HOTLink Transmitter-C
Not yet rated 		10/11/11
AN1089 - Parallel Cyclic Redundancy Check (CRC) for HOTLink®
Discusses using CRC codes to insure data integrity over high-speed serial links.
(3/5) by 1 user 		10/11/11
AN1077 - Replacing Wire with Inexpensive Plastic Fiber Solutions
AN1077 explains the advantages of low cost fiber-optic solution and ways to implement it using Cypress CY7B923/CY7B933 HOTLink transceivers.
Not yet rated 		10/11/11
AN1125 - Interfacing the CYS25G0101DX to Differential LVPECL
This application note demonstrates how to connect the single-ended interface of CY25G0101DX to the differential LVPECL device.
Not yet rated 		10/11/11
AN1038 - Upgrade Your TAXI–275 with HOTLink®
Upgrade TAXI-275 (AM79168/AM79169) devices with the HOTLink (CY7B923/CY7B933) devices.
Not yet rated 		10/11/11
AN17004 - Decoupling Guidelines for the CYS25G0101DX OC-48 SONET Transceiver
Decoupling Guidelines for the CYS25G0101DX OC-48 SONET Transceiver
Not yet rated 		10/04/11
AN1047 - Understanding Bit-Error-Rate with HOTLink®
Explains the concept of an error rate for serial interfaces.
Not yet rated 		09/15/11
AN1027 - Using High-Speed Serial Links to Supplement Parallel Data Buses

Not yet rated 		06/20/11
AN014 - Channel Bonding with HOTLink II Transceiver

Not yet rated 		05/17/11
Power Consumption of HOTLink II (TM) Family of Devices - AN027

Not yet rated 		05/13/11
Configuring the HOTLink II(TM) CYP15G0403DXB - AN067

Not yet rated 		05/12/11
Frequently Asked Questions About the CYP(V)15G0403DXB Device - AN060_B
The following are Frequently Asked Questions (FAQs) by customers who are evaluating CYP(V)15G0403DXB devices. The CYP(V)15G0403DXB is a member of Cypress?s High-Speed Frequency Agile HOTLink II? produ
Not yet rated 		05/06/11
AN17006 - High Speed Serial Simulation with HOTLink II™
AN17006 discusses the methodology for simulation of high speed links of the HOTLink II™ over the backplanes, using H-Spice.
Not yet rated 		03/22/11
HOTLink(R) CY7B923/CY7B933 to HOTLink II(TM) Migration - AN1160
This application note discusses how to migrate from HOTLink-based designs to HOTLink II-based designs.
(4/5) by 1 user 		02/16/11
Crosstalk Analysis of the Quad Independent Channel HOTLink II(TM) Device - AN4047
This application note shows that the quad independent channel HOTLink II device operates reliably for large and small variations of frequencies across all channels.
Not yet rated 		02/14/11
Connecting CY7B951/CY7B952 to 3.3V Framers - AN1226
This application note describes how to connect the 5-V PECL outputs of the CY7B951 or CY7B952 to 3.3-V PECL inputs, and also how to connect the 5-V PECL inputs of the CY7B951 or CY7B952 to 3.3-V PECL
Not yet rated 		01/20/11
Interfacing the HOTLink II(TM) Transceiver with the 3.3V Gennum GS1524 Equalizer and GS1528 Cable Driver for Digital Video - AN080

Not yet rated 		01/18/11
CY7B952 Layout Recommendation - AN1239

Not yet rated 		11/25/10
AN1025 - Using HOTLink® with Long Copper Cables
Discusses the additional problems that must be considered when driving very long cables.
Not yet rated 		04/07/10
Results 1 - 26 of 26
Sunset Owner: SD; Secondary Owner: EHK;