|
Title
|
Customer Rating
|
Updated
|
Comparison of Resource Utilization Between PSoC® 3, PSoC 5 and PSoC 5LP UDBs and Other Vendor CPLDs - KBA85325
Question: How do PSoC UDBs compare with other vendor CPLDs for logic utilization of common functions?
|
Not yet rated
|
01/18/13 |
Missing Watchdog Enable Parameter in CY8C29xxx Devices - KBA85221
Question: I created a new project with one of the CY8C29xxx family devices in PSoC Designer™ 5.3. However, I cannot find the Watchdog Enable parameter in the Global Resources Window. Is there a workaround for this?
|
Not yet rated
|
01/08/13 |
Using the printf Function in PSoC® 3 - KBA83472
Question: How do I use the printf function in stdio.h to send data to UART?
|
Not yet rated
|
01/08/13 |
Using CSD2X UM with CY8C22X45/CY8C21X45 - KBA84272
Question: When I create a new project with the CY8C22x45 or CY8C21x45 family of devices and place the CSD2X User Module (UM) version 1.0, the configuration wizard is empty. What is the workaround for this?
|
Not yet rated
|
01/07/13 |
CY8CKIT-050 PSoC® 5 Development Kit MHz Crystal- KBA82852
Question: Why do USB/UART-related projects using CY8CKIT-050 not work when I update to PSoC Creator 2.0 or later version?
|
Not yet rated
|
01/03/13 |
PSoC® 3, PSoC 5, and PSoC 5LP Breakpoints and Watchpoints - KBA84801
Question: How many breakpoints and watchpoints are supported in PSoC® Creator™ for PSoC 3, PSoC 5, and PSoC 5LP?
|
Not yet rated
|
12/19/12 |
Documentation and Training for PSoC® Creator™ Component Development - KBA80958
Question: What documents and training are available for PSoC® Creator™ component development?
|
Not yet rated
|
12/19/12 |
Using the PSoC 5 MHz ECO on CY8CKIT-050 and CY8CKIT-010 - KBA84757
Question: How should the PSoC 5 kit hardware and firmware be configured to use the MHz ECO?
|
Not yet rated
|
12/10/12 |
Function Pointer - KBA84041
Question: How do I declare pointer to functions?
|
Not yet rated
|
12/07/12 |
VDAC8 Output Voltage in PSoC® 3 and PSoC 5 - KBA84732
Question: The VDAC8 output does not go beyond 2.4 V even when the VDAC8 range is set to 4.080 V in PSoC® 3 and PSoC 5. What is the solution for this?
|
Not yet rated
|
12/07/12 |
Obsolete 48-pin SSOP PSoC® 5 Devices - KBA84779
Question: Do the PSoC® 5 and PSoC 5LP device families support 48-pin SSOP packages?
|
(1/5) by 1
user
|
12/07/12 |
PSoC® 5 Pin Packages - KBA84775
Question: Where can I find the available PSoC® 5 and PSoC 5LP pin packages?
|
Not yet rated
|
12/07/12 |
PSoC® Creator™ Version or Build Number in the .rpt File - KBA84777
Question: Can I find the PSoC® Creator™ version or build number from the .rpt file of a compiled project?
|
Not yet rated
|
12/07/12 |
PSoC® 3 and PSoC 5 BSDL Files - KBA84780
Question: Where are the JTAG BSDL files for PSoC® 3 and PSoC 5LP devices located?
|
Not yet rated
|
12/07/12 |
STA Warnings IN PSoC® 3 ES3/Production Release Silicons- KBA 84739
Question: Why do I get Static Timing Analysis (STA) warnings in my design for PSoC® 3 ES3 and Production release silicons and PSoC 5LP? I do not get these warnings if I port the project to PSoC 3 ES2 or PSoC 5.
|
Not yet rated
|
12/06/12 |
Delay between Bytes when SPIM_PutArray API is used - KBA82854
Question: Why is there a delay between successive bytes when the SPIM_PutArray API is used?
|
Not yet rated
|
12/06/12 |
PSoC® 3, PSoC 5, and PSoC 5LP AN Project File Naming Convention and Use – KBA84803
|
Not yet rated
|
12/06/12 |
PSoC® 5 and PSoC 5LP Flash Memory Organisation and Array ID Parameter - KBA 84740
Question: How is flash memory organized in PSoC® 5 and PSoC 5LP? How do we choose the array ID parameter for the CyWriteRowData API?
|
Not yet rated
|
12/06/12 |
Supported Bootloaders in PSoC® 3, PSoC 5, and PSoC 5LP Devices - KBA 84744
Question: Which bootloaders do PSoC® 3, PSoC 5, and PSoC 5LP devices support in PSoC Creator?
|
(5/5) by 1
user
|
12/04/12 |
Selecting the Desired PSoC® 3 or PSoC 5 Part Number for a Project in PSoC Creator™ - KBA84387
Question: How do you select the PSoC 3 or PSoC 5 part number you need for a project in PSoC Creator?
|
Not yet rated
|
12/03/12 |
Types of Memories Supported by PSoC® 3 or PSoC 5 EMIF - KBA83241
Question: What type of memories will be supported by EMIF component?
|
Not yet rated
|
11/28/12 |
Programming PSoC® 3 First Touch Starter Kit CY8CKIT-003 - KBA83430
Question: Do I need to purchase a MiniProg3 to program the PSoC 3 First Touch Starter Kit CY8CKIT-003?
|
Not yet rated
|
11/20/12 |
ADC Performance with External Reference in PSoC® 3 or PSoC 5 – KBA83438
Question: Does an external reference improve the ADC performance?
|
Not yet rated
|
11/19/12 |
Connections on Vcca and Vccd Pins of PSoC® 3 and PSoC 5 - KBA83234
Question: Can the Vccd and Vcca pin on PSoC 3 and PSoC 5 be tied to an external voltage?
|
Not yet rated
|
11/19/12 |
Driving an External Load using VDAC in PSoC® 3 or PSoC 5 - KBA83238
Question: How do I directly drive an external circuit using VDAC in PSoC 3 or PSoC 5?
|
(5/5) by 1
user
|
11/19/12 |
Current Drawn on XRES Pin of MiniProg1 - KBA83337
Question: How to calculate the current drawn on XRES pin of MiniProg1 during programming?
|
Not yet rated
|
10/25/12 |
PSoC Creator™ - Keil Compiler Registration - KBA83314
Question: How do I register the Keil compiler that comes with PSoC Creator?
|
(1.5/5) by 4
users
|
10/19/12 |
Source/Sink Resistance of PSoC® 1 GPIO - KBA83806
Question: What are the source and sink resistances of PSoC 1 GPIO configured in strong drive mode?
|
Not yet rated
|
10/18/12 |
Warning: Machine Instructions Inside .LITERAL/.ENDLITERAL Labels - KBA83511
Question: What does the warning, “Probable ERROR! Machine instructions inside .LITERAL/.ENDLITERAL will cause problems with Code Compression optimization”, mean when building a PSoC Designer project?
|
Not yet rated
|
10/18/12 |
CY8CKIT-050 Voltage Display Does Not Vary with Potentiometer - KBA82298
Question: Why does my CY8CKIT-050 fail to show the voltage display varying with potentiometer as shown in the Quick Start Guide?
|
Not yet rated
|
10/10/12 |
Interfacing PSoC® 3/PSoC 5 with an Android Device - KBA83909
Question: Can the USB component in PSoC 3 work with an Android Device?
|
Not yet rated
|
10/10/12 |
Workaround to Avoid the Glitch Generated by LVI/HVI Circuits of PSoC® 3 or PSoC 5 After Power Up - KBA83204
Question: PSoC 3 and PSoC 5 TM device Technical Reference Manuals (TRMs), in the section, “Processing a Low/High Voltage Detect Interrupt” specify the glitch conditions. A glitch will be generated after the device is powered up and configured to LVI/HVI circuits to trigger an interrupt instead of device reset. What is the code snippet which can be used to avoid this glitch?
|
Not yet rated
|
10/08/12 |
PSoC® 5 TM Generates LVD Trigger after Every Wakeup Though Supply Voltage is Above the Threshold - KBA83200
Question: PSoC 5 TM is generating LVI/HVI trigger after every wake-up from Low Power mode (Sleep) even though the supply voltage is above the Threshold set for Low Voltage Detect (LVD) trigger and less than the default threshold set for High Voltage Detect (HVD). What is the workaround for this issue?
|
Not yet rated
|
10/08/12 |
Flash_Program_Temperature_deg_C - Parameter of the (non-CY8C20XX6A) BootLdrI2C User Module Versions 2.00-2.20 is Broken - KBA82148
Question: "Flash_Program_Temperature_deg_C" user module parameter value is ignored in the (non-CY8C20XX6A) BootLdrI2C UM versions 2.00-2.20, and is never used if the application does not call the BL_SetTemp API function. The actual temperature value that is used in the programming algorithms is always zero degrees, Celsius. What is the problem and how do I make this working?
|
Not yet rated
|
10/04/12 |
Best Method of Amplification to get Better Performance from PSoC® 3 OR PSoC 5 Del Sig ADC - KBA81866
Question: What are the different possible methods of amplification available for using with PSoC 3 or PSoC 5 Del Sig ADC? What is the best method of them to get better performance?
|
Not yet rated
|
10/03/12 |
Fixing Compilation Errors While Updating UMs in PSoC® Designer™ 5.1, SP3 - KBA82259
Question: How to fix the compilation errors due to EzI2C User Module been updated?
|
Not yet rated
|
09/27/12 |
Development Environment Needed to Configure PROC-UI - KBA82018
Question: What development environment do I need to configure PRoC-UI?
|
Not yet rated
|
09/26/12 |
SETTING THE SLIDER RESOLUTION PARAMETER FOR CYONS FAMILY - KBA#82146
Question: How to set the slider resolution parameter for a CSA User Module in devices belonging to CYONS family?
|
Not yet rated
|
09/12/12 |
SVF and STAPL Support for PSoC® 3 JTAG Devices - KBA81849
Question:Why am I not able to program PSoC 3 devices using SVF and/or STAPL formats?
|
Not yet rated
|
09/12/12 |
PSoC Creator™ Version Support for CY8CKIT-033 Example Projects - KBA82247
Question: Which version(s) of PSoC Creator is (are) supported by CY8CKIT-033 example project?
|
Not yet rated
|
09/11/12 |
Comparator Generating Multiple Interrupts
My comparator is triggering multiple interrupts. What could be the reason and how to prevent the same?
|
Not yet rated
|
08/03/12 |
PSoC® 3 Boost Inductor Size - KBA80957
Question: What size inductor should I use for the PSoC 3 boost circuit?
|
Not yet rated
|
07/13/12 |
New clock synchronization check exposes aliased scan rate issue in CapSense
Why does PSoC Creator 2.1 generate a clock synchronization warning in my working CapSense design?
|
Not yet rated
|
06/28/12 |
Default Device Configuration Mode changed from "DMA" to "Compressed"
Why do applications created in PSoC Creator 2.1 boot slightly slower than before?
|
Not yet rated
|
06/14/12 |
Detecting, Debugging and Preventing of Stack Overflow
How to detect, debug and prevent Stack Overflow?
|
(5/5) by 1
user
|
05/29/12 |
Cypress Parts Baking Condition Information
Do Cypress parts require baking? If so, what are the conditions?
|
Not yet rated
|
05/24/12 |
Country of Origin (COO) Information
Where can I find the Country of Origin (COO) of a Cypress product?
|
Not yet rated
|
05/24/12 |
Get errors in all-assembly PSoC 3 projects - L51: UNRESOLVED SYMBOL ?C_STARTUP
Why does the Keil linker generate this message when I turn on the inline assembly directive?
|
Not yet rated
|
05/22/12 |
PSoC Creator hangs while loading on a machine having Kaspersky antivirus
Why is PSoC Creator identified as threat in Kaspersky antivirus?
|
Not yet rated
|
05/13/12 |
Gates in UDB Block of PSoC 3/5
How many gates does the UDB of PSoC 3/5 have?
|
Not yet rated
|
05/07/12 |