CapSense

Touch sensors have been around for years, but recent advances in mixed signal programmable devices are making capacitance-based touch sensors a practical and value-added alternative to mechanical switches in a wide range of consumer products. Included in this area are IP Elements intended to help designers implement Capactive Sensing designs with the PSoC.

Resources

Results 1 - 15 of 15

Title	Customer Rating	Updated
The Failure Mode and Effect Analysis (FMEA) Implementation for CSD Proposed functions allow performing run-time sensors diagnostic in CSD-based designs	Not yet rated	01/20/10
CapSense Best Practices The topics covered include an overview of sensing methods, guidelines for layout and assembly, and CapSense tools and techniques.	(4.3/5) by 4 users	01/14/10
CapSense Express Software Tool This application IP explains how to use the CapSense(TM) Express software tool to configure the CapSense Express device.	Not yet rated	01/05/10
Cooker Table With Spring-CapSense Slider Similar to the Cooker Table With Springs as CapSense Sensors	Not yet rated	12/21/09
Induction Cooker Design with CapSense This application note discusses the implementation of an induction cooker with CapSense(TM) control based on CY8C22x45.	(4/5) by 2 users	12/21/09
Multichannel LED Dimmer with CapSense Control This Application IP describes a multichannel LED dimmer controlled by capacitive sensors. The	(4/5) by 1 user	12/21/09
CY8C20111 Button Reference Design This application IP explains how to create simple reference designs with the CY8C20111 devices and also demonstrates the functionality of these devices through example projects.	(3/5) by 1 user	12/16/09
CY8C20121 2 Button Reference Design	Not yet rated	12/16/09
Segment LCD Glass Drive Using PSoC with CapSense This application IP presents the technique to drive multiplexed LCD glass with 1/2 bias using PSoC device equipped with analog MUX bus. Along with LCD drive mechanism; this also guides you to integrate CapSense technology in the same solution.	Not yet rated	12/16/09
Introduction and Migration to 28xxx This Application IP introduces the CY8C28xxx family of parts. It covers the improved digital and analog resources as compared to the 21/24/27/29xxx series of PSoC 1 parts. This application note also describes the process of migrating a design to the 28xxx series in PD5.0	Not yet rated	12/16/09
CapSense Express Power and Sleep Considerations This application IP describes the different power and sleep operation modes supported by CapSense Express.	Not yet rated	12/15/09
CapSense Express - Configuring PWM for LED Intensity Control This application IP describes the Pulse Width Modulation (PWM) output functionality to support LED dimming for CapSense Express.	Not yet rated	12/15/09
Using Springs as CapSense(TM) Sensors This application IP considers the possibility of using springs as sensors.	Not yet rated	12/14/09
Implementing Feedback for CapSense This application IP describes how to implement three types of feedback mechanisms in a CapSense based design.	Not yet rated	12/10/09
CapSense(TM) PLUS Dynamically Configuring Capsense Dynamic reconfiguration is one of the powerful features of PSoC(R). This application note explains how to create a CapSense(TM) PLUS application with dynamic reconfiguration.	(4.5/5) by 2 users	09/07/09

Results 1 - 15 of 15

Browse Applications

CapSense

Resources