hi to all,

              do we have resistors and capacitors in creator 2.0 for psoc 3.if they are in creator from where can we access and their firmware.

thanks

PRP

R and C elements in PSOC 3 only exist as annotated/schematic components, are

not physical components.

That being said take a look at this - http://www.cypress.com/?app=forum&id=2233&rID=63395

Additionally depends on what you are using R & C for, trying to create a filter, there is a DFB

block on the chip to do filtering. You could always create a sampled data  R or C via using a

mux as sampled data switch for R, with external C.

Regards, Dana.

Small correction, this -

You could always create a sampled data R or C via using a

mux as sampled data switch for R, with external C.

Should be this -

You could always create a sampled data R using a mux as

sampled data switch for R, with external C. Its impractical

do do so with stray chip C due to values being so low.

Regards, Dana.

 so we have to use these externally only